2007/09/24 An Improved Fuse and ARC Suppressor is Now Used in the Axle Oil Cooler Wiring Harness {1365, 1408} Caterpillar


An Improved Fuse and ARC Suppressor is Now Used in the Axle Oil Cooler Wiring Harness {1365, 1408}
`
2007/09/24 [SEPD0907]
COOLING SYSTEM
COOLER GP
2007/09/24 An Improved Fuse and ARC Suppressor is Now Used in the Axle Oil Cooler Wiring Harness {1365, 1408}
Load Haul Dump:
R1600 (S/N: 9XP1-UP; 9EW1-UP)
R1600G (S/N: 9PP1-UP)

Description of Change: An improved fuse and ARC suppressor is now used in the axle oil cooler wiring harness.

The installation of two new fuses and ARC suppressors in the wiring harness provides additional protection for the axle oil cooler motors.

Adaptable To: The new 1DE3994 Fuse and ARC Suppressor replaces the former 189-3158 Arc Suppressor .

The 1DE3994 Fuse and ARC Suppressor is effective in production with:

  • R1600G (S/N: 9PP247-UP)

The 1DE3994 Fuse and ARC Suppressor is adaptable to the following machines if equipped with axle oil cooling:

  • R1600 (S/N: 9EW1-UP; 9XP1-UP) and R1600G (S/N: 9PP1-246)

Table 1
Part Number     Description     Qty    
1DE3994     Fuse and ARC Suppressor     2    



    Illustration 1g01410403

    The axle oil cooler group is located in the transmission compartment

    (1) 1DE3994 Fuse and ARC suppressor

    (2) 9EQ2356 Harness As

  1. Remove and discard the two 189-3158 Arc Suppressors from 9EQ2356 Harness As (2) .

  1. Install two 1DE3994 Fuse and ARC suppressors (1) to 9EQ2356 Harness As (2) .

Information System:

R1600G Load Haul Dump Machine Systems Tilt Lever and Tilt Link - Install
R1600G Load Haul Dump Machine Systems Tilt Lever and Tilt Link - Remove
R1600G Load Haul Dump Machine Systems Main Control Valve - Install
R1600G Load Haul Dump Machine Systems Main Control Valve - Remove
R1600G Load Haul Dump Machine Systems Steering Cylinder - Remove
R1600G Load Haul Dump Braking System Parking Brake - Manual Release
R1600G Load Haul Dump Braking System Brake Disc Wear - Check
140M and 150 Motor Graders Engine Supplement Aftercooler - Install
3176C Engine for the R1600G and the R1700G Load Haul Dumps Engine Top Speed Is Not Obtained
3176C, 3406E and 3456 Industrial Engines Engine Shutdown Is Intermittent
CP76 and CS76 Vibratory Compactors Propel System Neutral Start Switch - Test and Adjust
3176C Engine for the R1600G and the R1700G Load Haul Dumps Engine Misfires, Runs Rough or Is Unstable
140H and 160H Motor Graders Changing Direction and Speed
3176C Engine for the R1600G and the R1700G Load Haul Dumps Oil Pressure Is Low
3176C Engine for the R1600G and the R1700G Load Haul Dumps Power Is Intermittently Low or Power Cutout Is Intermittent
3176C Engine for the R1600G and the R1700G Load Haul Dumps Speed Control (Remote Throttle) - Test
938H Wheel Loader and IT38H Integrated Toolcarrier Hydraulic System Ride Control Accumulator - Test and Charge
793D Off-Highway Truck Machine Systems Service and Parking Brake (Front) - Remove
793D Off-Highway Truck Machine Systems Service and Parking Brake (Front) - Install
793D Off-Highway Truck Machine Systems Service and Parking Brake (Front) - Disassemble
793D Off-Highway Truck Machine Systems Service and Parking Brake (Front) - Assemble
793C Off-Highway Truck Machine Systems Front Suspension (Cylinder) - Remove
793C Off-Highway Truck Machine Systems Front Suspension (Cylinder) - Install
793D Off-Highway Truck Machine Systems Front Suspension (Cylinder) - Remove