Additional Parts are Available for the Filler Cap {3177, 4332, 5056}
`
2007/09/17
[SEPD0906]
2007/09/17
Improved Idler For Chain Tension Adjuster on Trenchers {4159, 7000}
2007/09/17
New Cab Temperature Control Potentiometer Is Now Available {5721}
HYDRAULIC SYSTEM
TANK GP
2007/09/17
Additional Parts are Available for the Filler Cap {3177, 4332, 5056}
- Off-Highway Truck/Tractor:
- 784C (S/N: 2PZ1-UP)
- 785 (S/N: 8GB1-UP)
- 785B (S/N: 6HK1-UP)
- 785C (S/N: 1HW1-UP; APX1-UP; 5AZ1-UP)
- 789 (S/N: 9ZC1-UP)
- 789B (S/N: 7EK1-UP)
- 789C (S/N: 2BW1-UP)
- 793 (S/N: 3SJ1-UP)
- 793B (S/N: 1HL1-UP)
- 793C (S/N: CBR1-UP; 4AR1-UP; ATY1-UP; 4GZ1-UP)
- 793D (S/N: FDB1-UP)
- 797 (S/N: 5YW1-UP)
- 797B (S/N: JSM1-UP)
The 7H-1447 Filler Cap is part of the groups that are listed in Table 1.
Show/hide table
Use of the 7H-1447 Filler Cap     | |
Description     | Part Number     |
Steering Tank and Filter Gp     | 155-4127, 6E-6296, 155-4127, 155-6660, 6E-0918, 125-4276, 132-6285, 248-6246     |
Hydraulic and Transmission Tank (Torque Converter), (Hoist), (Brake) and (Transmission)     | 161-0536, 4T-4147, 9T-8921     |
Hydraulic and Transmission Tank     | 4T-2732, 9T-7972     |
Tank and Filter Gp     | 1U-4840, 9T-4157     |
Power Train Oil Lines Gp     | 124-7704, 240-4803     |
Torque Converter Ar     | 140-7001, 284-4239     |
Hydraulic Tank Guard Gp     | 149-1200     |
Show/hide table
Illustration 1 | g01409828 |
A typical view of the filler cap |
When you order a new 7H-1447 Filler Cap (1), additional parts must be ordered in order for the filler cap to correctly fit. The additional parts are usually part of the group or arrangement. The additional parts will prevent contamination from entering the systems. When you order a new 7H-1447 Filler Cap (1), also order the following parts.
- One 8T-2275 Ball (2)
- One 2D-4202 Plate (3)
- One 9H-6454 Gasket (4)
The parts can be used back to the beginning of production of the machines. Order the parts through the parts distribution system.
Information System:
CS54 and CP54 Vibratory Soil Compactors
Engine Air Filter Primary Element - Clean/Replace
143H and 163H Motor Graders
Wheel Bearing Oil Sample (Front) - Obtain - If Equipped
CP76 and CS76 Vibratory Compactors Propel System
Relief Valve (Main, Drum Propel Pump) - Test and Adjust
770 and 772 Off-Highway Trucks Power Train
Transfer Gears - Assemble
770 and 772 Off-Highway Trucks Power Train
Transfer Gears - Disassemble
CP76 and CS76 Vibratory Compactors Propel System
Relief Valve (Charge Pressure, Axle Propel Pump) - Test and Adjust
3176C Engine for the R1600G and the R1700G Load Haul Dumps
Shutdown - Test
CP76 and CS76 Vibratory Compactors Propel System
Relief Valve (Charge Pressure, Drum Propel Pump) - Test and Adjust
CS54 and CP54 Vibratory Soil Compactors
Lubricant Viscosities
140M and 150 Motor Graders Engine Supplement
Refrigerant Compressor - Remove and Install
CP76 and CS76 Vibratory Compactors Machine Systems
Piston Motor (Vibratory) - Test - Cooling Valve
CP56, CP64, CP74, CS56, CS64 and CS74 Paving Compactors Machine Systems
Axle Housing (Parking Brake, Differential and Bevel Gear) - Assemble
770 and 772 Off-Highway Trucks Power Train
Transmission Hydraulic Control - Remove
3176C Engine for Caterpillar Built Machines
Injector Solenoid - Test
770 and 772 Off-Highway Trucks Power Train
Transmission Hydraulic Control - Install
770 and 772 Off-Highway Trucks Power Train
Transmission Hydraulic Control - Disassemble
770 and 772 Off-Highway Trucks Power Train
Transmission Hydraulic Control - Assemble
Wiring the 9X-9591 Electrical Converter Gp (PULSE WIDTH MODULATED){1421, 1901, 7490}
3176C Engine for the R1600G and the R1700G Load Haul Dumps
Sensor Signal (Analog, Active) - Test
C4.4 (Mech) Industrial Engine
Fuel System Pressure - Test
16M Motor Grader
Operator Controls
140M and 150 Motor Graders Engine Supplement
Fuel Filter (Secondary) and Fuel Filter Base - Remove and Install
3176C Engine for the R1600G and the R1700G Load Haul Dumps
Sensor Supply - Test
Installing the 290-9911 Engine Enclosure Seal Kit {7263, 7263, 7273}