M318C and M322C Excavators Machine Systems Hydraulic Hand Control - Install - Stabilizer and Blade Caterpillar


Hydraulic Hand Control - Install - Stabilizer and Blade
`
1.1. Installation Procedure

Installation Procedure


NOTICE

Keep all parts clean from contaminants.

Contamination of the hydraulic system with foreign material will reduce the service life of the hydraulic system components.

To prevent contaminants from entering the hydraulic system, always plug or cap the lines, fittings, or hoses as they are disconnected. Cover any disassembled components and clean them properly before assembly.

Clean the hydraulic system properly after any major component exchange or especially after a component failure, to remove any contamination.




    Illustration 1g00930901

  1. Position valve (7).

  2. Install bolts (12).


    Illustration 2g00930900

  3. Connect hose assembly (10) and hose assembly (11) onto valve (7).


    Illustration 3g00930899

  4. Connect hose assembly (8) and hose assembly (9) onto valve (7).


    Illustration 4g00930898

  5. Position cover (6).

  6. Install screws (5).


    Illustration 5g00930897

  7. Position cover (1).

  8. Connect harness assembly (3).

  9. Install knob (2).

  10. Install screw (4).

Information System:

M318C Excavator Machine Systems Hydraulic Hand Control - Remove - Stabilizer and Blade
AP-1000D, AP-1055D, AP-655C, BG-2255C, BG-2455D and BG-260D Asphalt Pavers MID 039 - CID 1763 - FMI 02
CS-563E, CP-563E, CS-573E, CP-573E, CS-583E, CP-583E, CS-663E, CP-663E and CS-683E Vibratory Soil Compactors Engine Oil and Filter - Change
3512 and 3516 EUI Engines for 784B, 785B, 789B and 793B Off-Highway Trucks Engine Overspeed Lamp and Engine Overspeed Alarm
CS-563E, CP-563E, CS-573E, CP-573E, CS-583E, CP-583E, CS-663E, CP-663E and CS-683E Vibratory Soil Compactors Engine Oil Sample - Obtain
CS-563E, CP-563E, CS-573E, CP-573E, CS-583E, CP-583E, CS-663E, CP-663E and CS-683E Vibratory Soil Compactors Engine Oil Level - Check
3054E Industrial Engine Engine Valve Lash - Inspect/Adjust
R2900 Load Haul Dump Belts - Inspect/Adjust
3054E Industrial Engine Glow Plugs - Test
CB-434D, CB-534D, CB-534D Series XW and CB-564D Paving Compactors Power Supply Circuit of Electronic Control Module
14H Motor Grader Machine Systems Piston Pump (Hydraulic and Steering) - Remove
3524B Engine for Caterpillar Built Machines Water Pump - Install
14H Motor Grader Machine Systems Metering Pump (Steering) - Remove and Install
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Hydraulic System Main Control Valve - IT38G Series II Integrated Toolcarrier
AP-1000D, AP-1055D, AP-655C, BG-2255C, BG-2455D and BG-260D Asphalt Pavers MID 039 - CID 0972 - FMI 02
3126B Machine Engines Sensors and Electrical Connectors
R2900 Load Haul Dump Maintenance Interval Schedule
Installation Instructions for the Machine Security System on the Medium Wheel Loaders{7631}
CB-634D Paving Compactor Machine Electronic Control System Reverse Propel
AP-1000D, AP-1055D, AP-655C, BG-2255C, BG-2455D and BG-260D Asphalt Pavers MID 039 - CID 0973 - FMI 02
3054E Industrial Engine Alternator - Test
C4.4 (Mech) Industrial Engine Fuel Injection Nozzle - Test
C4.4 (Mech) Industrial Engine Engine Oil Cooler - Inspect
3054E Industrial Engine Power Sources