3524B Engine for Caterpillar Built Machines Engine Oil Sequence Valves - Remove and Install Caterpillar


Engine Oil Sequence Valves - Remove and Install
`
3524B Engine for Caterpillar Built Machines [RENR2276]
LUBRICATION SYSTEM
VALVE GP
3524B Engine for Caterpillar Built Machines Engine Oil Sequence Valves - Remove and Install
1.1. Removal Procedure
2.1. Installation Procedure

Removal Procedure

Note: In order to remove the oil sequence valves, the front drive housing and the flywheel housing must be removed.


NOTICE

Keep all parts clean from contaminants.

Contaminants may cause rapid wear and shortened component life.



NOTICE

Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.

Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products.

Dispose of all fluids according to local regulations and mandates.




    Illustration 1g00912961

  1. Remove cover (1) from the front of the cylinder block.


    Illustration 2g00912963

    ------ WARNING! ------

    Personal injury can result from parts and/or covers under spring pressure.

    Spring force will be released when covers are removed.

    Be prepared to hold spring loaded covers as the bolts are loosened.


  2. Remove plunger assembly (2) and spring (3) from the front of the cylinder block.


    Illustration 3g00912966
    Typical example

    ------ WARNING! ------

    Personal injury can result from parts and/or covers under spring pressure.

    Spring force will be released when covers are removed.

    Be prepared to hold spring loaded covers as the bolts are loosened.


  3. Remove the idler gear and the shaft. Remove cover (4) on the rear of the cylinder block.


    Illustration 4g00912969
    Typical example

  4. Remove plunger assembly (5) and spring (6) from the rear of the cylinder block.

Installation Procedure


NOTICE

Keep all parts clean from contaminants.

Contaminants may cause rapid wear and shortened component life.




    Illustration 5g00912969
    Typical example

  1. Place clean engine oil on spring (6) and plunger assembly (5).

  2. Install spring (6) and plunger assembly (5).


    Illustration 6g00912966
    Typical example

    ------ WARNING! ------

    Improper assembly of parts that are spring loaded can cause bodily injury.

    To prevent possible injury, follow the established assembly procedure and wear protective equipment.


  3. Install cover (4) on the rear of the cylinder block. Install the idler gear and the shaft.


    Illustration 7g00912963

  4. Place clean engine oil on spring (3) and plunger assembly (2).

  5. Install spring (3) and plunger assembly (2) on the front of the cylinder block.


    Illustration 8g00589986

    ------ WARNING! ------

    Improper assembly of parts that are spring loaded can cause bodily injury.

    To prevent possible injury, follow the established assembly procedure and wear protective equipment.


  6. Install cover (1) on the front of the cylinder block.

Information System:

CP-563E, CP-573E, CS-563E, CS-573E and CS-583E Vibratory Soil Compactors Vibratory System Features
R2900 Load Haul Dump Transmission Control
TK711, TK721, TK722 and TK732 Track Feller Bunchers Hydraulic System Piston Motor (Swing Drive) Relief Valve Pressure - Test and Adjust
AP-1000D, AP-1055D, AP-655C, BG-2255C, BG-2455D and BG-260D Asphalt Pavers MID 039 - CID 0154 - FMI 08
AP-1000D, AP-1055D, AP-655C, BG-2255C, BG-2455D and BG-260D Asphalt Pavers MID 039 - CID 0153 - FMI 08
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Braking System Brake System Air - Purge
14H and 16H Motor Graders Power Train Transmission and Transfer Gears
574B Forwarder Power Train Transmission Gearbox
D350E and D400E Articulated Trucks Power Train Final Drive and Wheel
CP-563E, CP-573E, CS-563E, CS-573E and CS-583E Vibratory Soil Compactors Vibratory System Vibratory System
3054C Engines for Caterpillar Built Machines Fuel System
CS-563E, CP-563E, CS-573E, CP-573E, CS-583E, CP-583E, CS-663E, CP-663E and CS-683E Vibratory Soil Compactors Engine Starting
3512 and 3516 EUI Engines for 784B, 785B, 789B and 793B Off-Highway Trucks Air Filter Restriction Lamp
R2900 Load Haul Dump Machine Operation Information
RM-350B Road Reclaimer/Soil Stabilizer Machine Systems Rotor Drive Differential - Assemble
797 Off-Highway Truck Power Train Transmission
3524B Engine for Caterpillar Built Machines Crankshaft Rear Seal and Wear Sleeve - Remove
AP-655C and BG-2255C Asphalt Pavers Propel System Piston Pump Neutral - Test and Adjust
574B Forwarder Power Train Hydrostatic Drive System
AP-1000D, AP-1055D, AP-655C, BG-2255C, BG-2455D and BG-260D Asphalt Pavers MID 039 - CID 0168 - FMI 03
AP-1000D, AP-1055D, AP-655C, BG-2255C, BG-2455D and BG-260D Asphalt Pavers MID 039 - CID 0168 - FMI 04
CS-563E, CP-563E, CS-573E, CP-573E, CS-583E, CP-583E, CS-663E, CP-663E and CS-683E Vibratory Soil Compactors Drum Scrapers - Inspect/Adjust/Replace
120H and 135H Motor Graders Seat Belt
2002/11/18 Replacement Mobil-Trac System Belts Are Now Available for John Deere 8000T Series Agricultural Tractors {4198}