14H Motor Grader Machine Systems Fuel Tank (Right Side) - Remove Caterpillar


Fuel Tank (Right Side) - Remove
`
1.1. Removal Procedure

Removal Procedure

Table 1
Required Tools 
Tool  Part Number  Part Description  Qty 
ZZ  9U-7078  Cap 

Note: Cleanliness is an important factor. Before the disassembly procedure, the exterior of the component should be thoroughly cleaned. This will help to prevent dirt from entering the internal mechanism.

Note: SERVICE DATA: TOOLING (ZZ) WILL NOT BE IDENTIFIED IN PHOTOGRAPHS IN THE REMOVAL OR THE INSTALLATION. THIS TOOLING IS SHOWN IN ORDER TO ASSIST THE EXPERIENCED SERVICEMAN.


NOTICE

Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.

Refer to Special Publication, PERJ1017, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products.

Dispose of all fluids according to local regulations and mandates.


Note: Put identification marks on all lines, on all hoses, on all wires, and on all tubes for installation purposes. Plug all lines, hoses, and tubes. This helps to prevent fluid loss and this helps to keep contaminants from entering the system.



    Illustration 1g00930118

  1. Remove panel (1).

  2. Remove door (2).


    Illustration 2g00930119

  3. Disconnect hose (3).


    Illustration 3g00930121

  4. Disconnect quick coupler (4) and remove clip (5).


    Illustration 4g00930123

  5. Disconnect hose (6).


    Illustration 5g00931431


    Illustration 6g00931433

  6. Attach a suitable lifting device to fuel tank (12).

    Note: The fuel tank can be removed with fuel in the tank.

  7. Remove bolts (14) in order to remove bracket (15).

  8. Remove bolts (7) in order to remove bracket (8).

  9. Remove bolts (9) and the sleeves.

  10. Remove bolts (10) and remove bracket (11).

  11. Remove bolts (16) and plate (17).


    Illustration 7g00931439

  12. Lift fuel tank (12) off support (18) in order to disconnect quick disconnect (19). Remove fuel tank (12).

Information System:

AP-1000D, AP-1055D, AP-655C, BG-2255C, BG-2455D and BG-260D Asphalt Pavers MID 039 - CID 0150 - FMI 08
TK711, TK721, TK722 and TK732 Track Feller Bunchers Hydraulic System Tilt Cylinder Drift - Check
TK711, TK721, TK722 and TK732 Track Feller Bunchers Hydraulic System Piston Pump Margin Pressure - Test
TK711, TK721, TK722 and TK732 Track Feller Bunchers Hydraulic System Stick Cylinder Drift - Check
TK711, TK721, TK722 and TK732 Track Feller Bunchers Hydraulic System Boom Cylinder Drift - Check
3054E Industrial Engine Electronic Control System
14H and 16H Motor Graders Power Train Final Drive and Tandem Drive
TK711, TK721, TK722 and TK732 Track Feller Bunchers Hydraulic System Swing Speed and Swing Drift on a Slope - Check
797B Off-Highway Truck Fan Drive Hydraulic System General Information
3054E Industrial Engine Fuel Injection
TK741, TK751 and TK752 Track Feller Bunchers Machine Systems Swing Speed and Overswing on Level Ground - Check
14H Motor Grader Machine Systems Piston Pump (Fan Drive) - Install
14H Motor Grader Machine Systems Fuel Tank (Right Side) - Install
CS-563E, CP-563E, CS-573E, CP-573E, CS-583E, CP-583E, CS-663E, CP-663E and CS-683E Vibratory Soil Compactors Engine Starting
3054C Engines for Caterpillar Built Machines Fuel System
CP-563E, CP-573E, CS-563E, CS-573E and CS-583E Vibratory Soil Compactors Vibratory System Vibratory System
D350E and D400E Articulated Trucks Power Train Final Drive and Wheel
574B Forwarder Power Train Transmission Gearbox
14H and 16H Motor Graders Power Train Transmission and Transfer Gears
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Braking System Brake System Air - Purge
AP-1000D, AP-1055D, AP-655C, BG-2255C, BG-2455D and BG-260D Asphalt Pavers MID 039 - CID 0153 - FMI 08
AP-1000D, AP-1055D, AP-655C, BG-2255C, BG-2455D and BG-260D Asphalt Pavers MID 039 - CID 0154 - FMI 08
TK711, TK721, TK722 and TK732 Track Feller Bunchers Hydraulic System Piston Motor (Swing Drive) Relief Valve Pressure - Test and Adjust
R2900 Load Haul Dump Transmission Control