14H Motor Grader Machine Systems Swivel - Install Caterpillar


Swivel - Install
`
1.1. Installation Procedure

Installation Procedure

Table 1
Required Tools 
Tool  Part Number  Part Description  Qty 
138-7575  Link Bracket 

Note: Cleanliness is an important factor. Before assembly, all parts should be thoroughly cleaned in cleaning fluid. Allow the parts to air dry. Wiping cloths or rags should not be used to dry parts. Lint may be deposited on the parts which may cause later trouble. Inspect all parts. If any parts are worn or damaged, use new parts for replacement.



    Illustration 1g00928387

  1. Attach Tooling (A) to swivel (7). Attach a suitable lifting device to Tooling (A). The weight of swivel (7) is approximately 39 kg (85 lb).

  2. Install swivel (7). Install bolts (8).

  3. Connect four hose assemblies (6).


    Illustration 2g00928384

  4. Position bracket (5) to the original location. Install pin (4) and install cotter pin (3).


    Illustration 3g00928380

  5. Connect hose assemblies (1) and (2).

  6. Check the level of the hydraulic system. Refer to Operation and Maintenance Manual, "Hydraulic System Oil Level - Check" for the correct procedure.

Information System:

CP-563E, CP-573E, CS-563E, CS-573E and CS-583E Vibratory Soil Compactors Vibratory System Support and Vibratory Drive
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Hydraulic System Gear Motor (Hydraulic Fan)
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Hydraulic System Ride Control System
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Hydraulic System Relief Valve (Line)
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Hydraulic System Relief Valve (Main)
14H Motor Grader Machine Systems Swivel - Remove
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Hydraulic System Pilot Valve
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Hydraulic System Piston and Vane Pump (Implement Section)
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Hydraulic System Electrical Output Components
R2900 Load Haul Dump Implement and Steering Lockout (STIC Steering) - Test
AP-1000D, AP-1055D, AP-655C, BG-2255C, BG-2455D and BG-260D Asphalt Pavers Diagnostic Code List
3176C and 3196 Engines for Caterpillar Built Machines Replacing the ECM
CP-563E, CP-573E, CS-563E, CS-573E and CS-583E Vibratory Soil Compactors Vibratory System Piston Motor (Vibratory System)
CP-563E, CP-573E, CS-563E, CS-573E and CS-583E Vibratory Soil Compactors Vibratory System Piston Pump (Vibratory System)
D350E and D400E Articulated Trucks Power Train Front Axle
120H and 135H Motor Graders Machine Systems Swivel - Disassemble
120H and 135H Motor Graders Machine Systems Swivel - Assemble
CP-563E, CP-573E, CS-563E, CS-573E and CS-583E Vibratory Soil Compactors Vibratory System Bypass Valve (Return Manifold)
14H Motor Grader Machine Systems Blade - Install
R2900 Load Haul Dump Lift Arm and Cylinder Bearings - Lubricate
Product Link 151/201 Electronic Control Module (ECM)
Product Link 151/201 System Components
Product Link 151/201 Spare Inputs
322C Forest Machine Hydraulic System Fan Motor Speed (Hydraulic Oil Cooler) - Test and Adjust