3524B Engine for Caterpillar Built Machines Water Temperature Regulators - Install Caterpillar


Water Temperature Regulators - Install
`
3524B Engine for Caterpillar Built Machines [RENR2276]
COOLING SYSTEM
REGULATOR GP-TEMPERATURE
3524B Engine for Caterpillar Built Machines Water Temperature Regulators - Remove
3524B Engine for Caterpillar Built Machines Water Temperature Regulators - Install
1.1. Installation Procedure

Installation Procedure

Table 1
Required Tools 
Tool  Part Number  Part Number  Qty 
439-3938  Link Bracket 
221-8647  Driver 
FT-3578  Driver As 
1S-0258  Plastic Hammer As 


    Illustration 1g06122796

  1. Use Tooling (C) and (D) to install vent valve (9).


    Illustration 2g00928147

  2. Install seal (8) to Tooling (B).

  3. Use Tooling (B) to install seal (8) to regulator housing (4).


    Illustration 3g06122794

  4. Install gasket (7) and water temperature regulators (6) to regulator housing (4).


    Illustration 4g00934949

  5. Attach Tooling (A) and a suitable lifting device to regulator housing (4) and position regulator housing (4) to the engine. The weight of regulator housing (4) is approximately 59 kg (130 lb). Install bolts (5).


    Illustration 5g00928067

  6. Connect tube assemblies (3) to regulator housing (4).


    Illustration 6g00928042

  7. Install elbow (2) and the gasket. Install tube assembly (1).

  8. Fill the cooling system. Refer to Operation and Maintenance Manual, SEBU7651, "Cooling System Coolant (DEAC) - Change" or Operation and Maintenance Manual, SEBU7651, "Cooling System Coolant (ELC) - Change".

Information System:

938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Braking System Service Brakes
R2900 Load Haul Dump Hydraulic System Oil Filter - Replace
R2900 Load Haul Dump Hydraulic System Oil - Change
D350E and D400E Articulated Trucks Power Train Rear Drive Shaft
2002/10/21 New Electronic Control Modules Used on Machine Engines {1901}
CP-563E, CP-573E, CS-563E, CS-573E and CS-583E Vibratory Soil Compactors Propel System Control Valve (Shift)
R2900 Load Haul Dump Hydraulic Line Screen - Clean
3524B Engine for Caterpillar Built Machines Water Temperature Regulators - Remove
R2900 Load Haul Dump Fuel Tank Cap and Strainer - Clean
R2900 Load Haul Dump Fuel System Water Separator - Drain
797 Off-Highway Truck Fan Drive Hydraulic System Fan - Calibrate
R2900 Load Haul Dump Fuel System Secondary Filter - Replace
CP-563E, CP-573E, CS-563E, CS-573E and CS-583E Vibratory Soil Compactors Machine Systems Steering, Fan and Leveling Blade System
C-9 Engine for Caterpillar Built Machines Ether Injection System - Test
AP-1000D, AP-1055D, AP-655C, BG-2255C, BG-2455D and BG-260D Asphalt Pavers MID 039 - CID 1703 - FMI 03
CP-563E, CP-573E, CS-563E, CS-573E and CS-583E Vibratory Soil Compactors Propel System Axle
CP-563E, CP-573E, CS-563E, CS-573E and CS-583E Vibratory Soil Compactors Propel System Final Drive Planetary (Drum Propel)
AP-1000D, AP-1055D, AP-655C, BG-2255C, BG-2455D and BG-260D Asphalt Pavers MID 039 - CID 1703 - FMI 05
AP-1000D, AP-1055D, AP-655C, BG-2255C, BG-2455D and BG-260D Asphalt Pavers MID 039 - CID 1703 - FMI 06
CP-563E, CP-573E, CS-563E, CS-573E and CS-583E Vibratory Soil Compactors Propel System Piston Pump (Axle Propel and Drum Propel)
CP-563E, CP-573E, CS-563E, CS-573E and CS-583E Vibratory Soil Compactors Propel System Piston Motor (Axle Propel)
AP-1000D, AP-1055D, AP-655C, BG-2255C, BG-2455D and BG-260D Asphalt Pavers MID 039 - CID 1704 - FMI 03
AP-1000D, AP-1055D, AP-655C, BG-2255C, BG-2455D and BG-260D Asphalt Pavers MID 039 - CID 1704 - FMI 05
AP-1000D, AP-1055D, AP-655C, BG-2255C, BG-2455D and BG-260D Asphalt Pavers MID 039 - CID 1704 - FMI 06