Water Temperature Regulators - Remove
`
3524B Engine for Caterpillar Built Machines
[RENR2276]
3524B Engine for Caterpillar Built Machines
Engine Oil Scavenge Pump - Install
3524B Engine for Caterpillar Built Machines
Water Temperature Regulators - Install
COOLING SYSTEM
REGULATOR GP-TEMPERATURE
3524B Engine for Caterpillar Built Machines
Water Temperature Regulators - Remove
3524B Engine for Caterpillar Built Machines
Water Temperature Regulators - Install
1.1. Removal Procedure
Show/hide table
| Required Tools | |||
| Tool | Part Number | Part Description | Qty |
| A | 439-3938 | Link Bracket | 2 |
Show/hide table
| NOTICE |
|---|
|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
Show/hide table
| NOTICE |
|---|
|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products. Dispose of all fluids according to local regulations and mandates. |
- Drain the coolant. Refer to Operation and Maintenance Manual, SEBU7651, "Cooling System Coolant (DEAC) - Change" or Operation and Maintenance Manual, SEBU7651, "Cooling System Coolant (ELC) - Change". The cooling system has a capacity of
1195 L (315 US gal) .Show/hide table
Illustration 1 g00928042 - Remove tube assembly (1), elbow (2), and the gasket.
Show/hide table
Illustration 2 g00928067 - Disconnect tube assemblies (3) from regulator housing (4).
Show/hide table
Illustration 3 g00934949 - Attach Tooling (A) and a suitable lifting device to regulator housing (4). Remove bolts (5) to remove regulator housing (4). The weight of regulator housing (4) is approximately
59 kg (130 lb) .Show/hide table
Illustration 4 g06122794 - Remove water temperature regulators (6) and gasket (7) from regulator housing (4). Remove seals (8).
Show/hide table
Illustration 5 g06122796 - Remove vent valve (9).
Information System:
R2900 Load Haul Dump
Fuel Tank Cap and Strainer - Clean
R2900 Load Haul Dump
Fuel System Water Separator - Drain
797 Off-Highway Truck Fan Drive Hydraulic System
Fan - Calibrate
R2900 Load Haul Dump
Fuel System Secondary Filter - Replace
C9 On-Highway Engines
Lubrication System
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Braking System
Vane Pump (Braking)
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Hydraulic System
Hydraulic Fan System
3524B Engine for Caterpillar Built Machines
Engine Oil Scavenge Pump - Install
2002/11/04
A New Water Aftercooler Group Is Used {1063}
3524B Engine for Caterpillar Built Machines
Engine Oil Scavenge Pump - Remove
Installation Instructions for Improved 317-2428 Steering Valve Gp {4307}
R2900 Load Haul Dump
Fuel System Primary Filter - Clean/Replace
R2900 Load Haul Dump
Hydraulic Line Screen - Clean
CP-563E, CP-573E, CS-563E, CS-573E and CS-583E Vibratory Soil Compactors Propel System
Control Valve (Shift)
2002/10/21
New Electronic Control Modules Used on Machine Engines {1901}
D350E and D400E Articulated Trucks Power Train
Rear Drive Shaft
R2900 Load Haul Dump
Hydraulic System Oil - Change
R2900 Load Haul Dump
Hydraulic System Oil Filter - Replace
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Braking System
Service Brakes
3524B Engine for Caterpillar Built Machines
Water Temperature Regulators - Install
CP-563E, CP-573E, CS-563E, CS-573E and CS-583E Vibratory Soil Compactors Machine Systems
Steering, Fan and Leveling Blade System
C-9 Engine for Caterpillar Built Machines
Ether Injection System - Test
AP-1000D, AP-1055D, AP-655C, BG-2255C, BG-2455D and BG-260D Asphalt Pavers
MID 039 - CID 1703 - FMI 03
CP-563E, CP-573E, CS-563E, CS-573E and CS-583E Vibratory Soil Compactors Propel System
Axle