Engine Oil Scavenge Pump - Install
`
3524B Engine for Caterpillar Built Machines
[RENR2276]
3524B Engine for Caterpillar Built Machines
Engine Oil Scavenge Pump - Remove
3524B Engine for Caterpillar Built Machines
Water Temperature Regulators - Remove
LUBRICATION SYSTEM
PUMP GP-SCAVENGE
3524B Engine for Caterpillar Built Machines
Engine Oil Scavenge Pump - Install
1.1. Installation Procedure
Show/hide table
| NOTICE |
|---|
|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Attach a suitable lifting device to the oil scavenge pump. The oil scavenge pump weighs approximately
32 kg (71 lb) . Lift the oil scavenge pump into position. Install bolts (10) in order to secure the pump. - Install elbow (9) with bolts (8).
Show/hide table
Illustration 2 g00604595 - Inspect O-ring seals (7). If a seal is cut, scratched, or cracked, obtain a new seal for assembly. Coat the bores for the O-ring seals with clean engine oil. Install the O-ring seals into tube (6).
- Install tube (6) onto the pump. Secure the tube with clips, washers, and bolts (5).
Show/hide table
Illustration 3 g00604551 - Clean the two screens from inside housing (2). Inspect the screens for good condition. Obtain new parts, if necessary. Place the screens into the housing.
- Place cover (4) onto the housing. Secure the cover with bolts and washers (3).
- Place the housing into position on the tube. Install the housing with bolts (1).
- Install the engine oil pan.
Show/hide table
| |
| Illustration 1 | g00604597 |
Information System:
2002/11/04
A New Water Aftercooler Group Is Used {1063}
3524B Engine for Caterpillar Built Machines
Engine Oil Scavenge Pump - Remove
Installation Instructions for Improved 317-2428 Steering Valve Gp {4307}
R2900 Load Haul Dump
Fuel System Primary Filter - Clean/Replace
R2900 Load Haul Dump
Fuel System - Prime
CP-563E, CP-573E, CS-563E, CS-573E and CS-583E Vibratory Soil Compactors Machine Systems
Location of Hydraulic Components
2002/10/21
A New Dust Ejector Group for the Exhaust is Now Available {1068}
AP-655C and BG-2255C Asphalt Pavers Attachments
Washdown System
D250E and D300E Articulated Trucks Power Train
Output Transfer Gear Group
C-9 Engine for Caterpillar Built Machines
Injection Actuation Pressure - Test
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Hydraulic System
Kickout System - Integrated Toolcarrier
2002/11/18
A New Hardened Hub and A New Hardened Adjusting Ring Are Used in Final Drives for Ensuring Wheel Bearing Preload {4051}
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Hydraulic System
Hydraulic Fan System
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Braking System
Vane Pump (Braking)
C9 On-Highway Engines
Lubrication System
R2900 Load Haul Dump
Fuel System Secondary Filter - Replace
797 Off-Highway Truck Fan Drive Hydraulic System
Fan - Calibrate
R2900 Load Haul Dump
Fuel System Water Separator - Drain
R2900 Load Haul Dump
Fuel Tank Cap and Strainer - Clean
3524B Engine for Caterpillar Built Machines
Water Temperature Regulators - Remove
R2900 Load Haul Dump
Hydraulic Line Screen - Clean
CP-563E, CP-573E, CS-563E, CS-573E and CS-583E Vibratory Soil Compactors Propel System
Control Valve (Shift)
2002/10/21
New Electronic Control Modules Used on Machine Engines {1901}
D350E and D400E Articulated Trucks Power Train
Rear Drive Shaft