3524B Engine for Caterpillar Built Machines Engine Oil Scavenge Pump - Remove Caterpillar


Engine Oil Scavenge Pump - Remove
`
1.1. Removal Procedure

Removal Procedure


NOTICE

Keep all parts clean from contaminants.

Contaminants may cause rapid wear and shortened component life.


  1. Remove the engine oil pan.


    Illustration 1g00604551

  2. Remove bolts (1) in order to remove housing (2).

  3. Remove bolts and washers (3) in order to remove cover (4). Two screens are inside of the housing. Remove the screens.


    Illustration 2g00604595

  4. Remove bolts, washers, and clips (5) in order to remove tube (6).

  5. Remove O-ring seals (7) from the tube.


    Illustration 3g00604597

  6. Remove bolts (8) in order to remove elbow (9).

  7. Attach a suitable lifting device to the oil scavenge pump. The oil scavenge pump weighs approximately 32 kg (71 lb). Remove bolts (10) in order to remove the pump.

Information System:

Installation Instructions for Improved 317-2428 Steering Valve Gp {4307}
R2900 Load Haul Dump Fuel System Primary Filter - Clean/Replace
R2900 Load Haul Dump Fuel System - Prime
CP-563E, CP-573E, CS-563E, CS-573E and CS-583E Vibratory Soil Compactors Machine Systems Location of Hydraulic Components
2002/10/21 A New Dust Ejector Group for the Exhaust is Now Available {1068}
AP-655C and BG-2255C Asphalt Pavers Attachments Washdown System
D250E and D300E Articulated Trucks Power Train Output Transfer Gear Group
C-9 Engine for Caterpillar Built Machines Injection Actuation Pressure - Test
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Hydraulic System Kickout System - Integrated Toolcarrier
2002/11/18 A New Hardened Hub and A New Hardened Adjusting Ring Are Used in Final Drives for Ensuring Wheel Bearing Preload {4051}
CP-563E, CP-573E, CS-563E, CS-573E and CS-583E Vibratory Soil Compactors Machine Systems Location of Electrical Components
CP-563E, CP-573E, CS-563E, CS-573E and CS-583E Vibratory Soil Compactors Machine Systems Features
2002/11/04 A New Water Aftercooler Group Is Used {1063}
3524B Engine for Caterpillar Built Machines Engine Oil Scavenge Pump - Install
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Hydraulic System Hydraulic Fan System
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Braking System Vane Pump (Braking)
C9 On-Highway Engines Lubrication System
R2900 Load Haul Dump Fuel System Secondary Filter - Replace
797 Off-Highway Truck Fan Drive Hydraulic System Fan - Calibrate
R2900 Load Haul Dump Fuel System Water Separator - Drain
R2900 Load Haul Dump Fuel Tank Cap and Strainer - Clean
3524B Engine for Caterpillar Built Machines Water Temperature Regulators - Remove
R2900 Load Haul Dump Hydraulic Line Screen - Clean
CP-563E, CP-573E, CS-563E, CS-573E and CS-583E Vibratory Soil Compactors Propel System Control Valve (Shift)