140M and 150 Motor Grader Window Wiper and Wiper Motor (Door) - Remove and Install - Door Caterpillar


Window Wiper and Wiper Motor (Door) - Remove and Install - Door
`
1.1. Removal Procedure
2.1. Installation Procedure

Removal Procedure



    Illustration 1g01415369

  1. Remove nuts (1). Disconnect hose (3). Remove window wiper (2).

    Note: Mark the position of window wiper (2) for installation purposes.



    Illustration 2g01415372

  2. Remove caps (4).

  3. Remove nuts (5).


    Illustration 3g01415374

  4. Remove screws (6).


    Illustration 4g01415375

  5. Open door (7). Remove screws (8). Remove cover (9).


    Illustration 5g01415400

  6. Disconnect harness assembly (10). Remove bolts (11). Disconnect linkage (13). Remove wiper motor (12).

Installation Procedure



    Illustration 6g01415400

  1. Connect linkage (13) onto wiper motor (12). Install bolts (11). Connect harness assembly (10).


    Illustration 7g01415375

  2. Install cover (9). Install screws (8). Close door (7).


    Illustration 8g01415374

  3. Install screws (6).


    Illustration 9g01415372

  4. Install nut (5). Tighten nut (5) to a torque of 38 ± 2 N·m (28 ± 2 lb ft).

  5. Install caps (4).


    Illustration 10g01415369

  6. Install window wiper (2).

    Note: Window wiper (2) must be installed on the alignment mark for proper operation.

  7. Connect hose (3). Install nut (1). Tighten nut (1) to a torque of 23 ± 1 N·m (204 ± 9 lb in).

    Note: Nut (1) must maintain a torque of 12 N·m (106 lb in) minimum.

Information System:

24M Motor Grader Power Train Electronic Control System MID 027 - CID 1473 - FMI 14
The Lubrication Sleeve in the Planetary Case and Parts Group is Inadequately Retained on some Off-Highway Trucks{3030, 3064, 3160, 7540}
CP56, CS56, CP64, CS64, CP74 and CS74 Vibratory Soil Compactors Machine Systems Piston Motor (Vibratory) - Test - Cooling Valve
CP56, CS56, CP64, CS64, CP74 and CS74 Vibratory Soil Compactors Machine Systems Case Drain Flow for Piston Motor (Vibratory) - Test
VIMS Communicator Troubleshooting
140M and 150 Motor Grader Power Train Gear Pump (Transmission Charging and Scavenge) - Install
140M and 150 Motor Grader Power Train Gear Pump (Transmission Charging and Scavenge) - Remove
CP54 and CS54 Vibratory Soil Compactors Machine Systems Hydraulic Oil Contamination - Test
CP56, CS56, CP64, CS64, CP74 and CS74 Vibratory Soil Compactors Machine Systems Magnetic Sensor (Vibratory) - Test and Adjust
CP56, CS56, CP64, CS64, CP74 and CS74 Vibratory Soil Compactors Machine Systems Vibratory Frequency - Test and Adjust - Fixed
C32 Engine for D11T Track-Type Tractors Inlet Air Temperature Is High
C27 and C32 Engines for Caterpillar Built Machines Exhaust Temperature Is High
CS54 and CP54 Vibratory Soil Compactors Operation Information
CP56, CS56, CP64, CS64, CP74 and CS74 Vibratory Soil Compactors Machine Systems Piston Pump Neutral (Vibratory) - Test and Adjust
AccuGrade Dealer ARO Installation For M-Series, M-Series 2, and M-Series 3 Motor Graders {7220}
CP56, CS56, CP64, CS64, CP74 and CS74 Vibratory Soil Compactors Machine Systems Gear Pump Flow (Steering) - Test
C32 Engine for D11T Track-Type Tractors CAN Data Link - Test
CP56, CS56, CP64, CS64, CP74 and CS74 Vibratory Soil Compactors Machine Systems Gear Pump Flow (Cooling Fan) - Test
CP56, CS56, CP64, CS64, CP74 and CS74 Vibratory Soil Compactors Machine Systems Relief Valve (Steering) - Test
120M and 12M Motor Grader Machine Systems Blade Lift Arm - Remove
CP54 and CS54 Vibratory Soil Compactors Machine Systems Relief Valve (Charge) - Test and Adjust
2009/03/02 A New Hose Is Now Used {1052, 1307}
C32 Engine for D11T Track-Type Tractors Cat Data Link - Test
2007/09/17 New Cab Temperature Control Potentiometer Is Now Available {5721}