140M and 150 Motor Grader Control Valve (Brake) - Install Caterpillar


Control Valve (Brake) - Install
`
1.1. Installation Procedure

Installation Procedure

Table 1
Required Tools    
Tool     Part Number     Part Description     Qty    
A     311-1362     Vacuum Gauge Gp     1    


NOTICE

Keep all parts clean from contaminants.

Contaminants may cause rapid wear and shortened component life.





    Illustration 1g01414867



    Illustration 2g01414858

  1. Position control valve (10) and install bolts (9) .

  1. Connect tube assembly (8) , tube assembly (7) , tube assembly (5) , tube assembly (4) , and tube assembly (3) .

  1. Install tube assembly (6) .



    Illustration 3g01413659

    Photo for illustration purposes only.

  1. Position cover (2) .

  1. Install bolts (1) . Repeat this step for the opposite side of the machine.



    Illustration 4g01397769

  1. Remove Tooling (A) .

End By: Disconnect the steering frame lock. Refer to Disassembly and Assembly, "Steering Frame Lock - Separate and Connect".