14L Motor Grader Machine Systems Control Valve (Brake) - Assemble Caterpillar


Control Valve (Brake) - Assemble
`
1.1. Assembly Procedure

Assembly Procedure



    Illustration 1g01414733

    ------ WARNING! ------

    Improper assembly of parts that are spring loaded can cause bodily injury.

    To prevent possible injury, follow the established assembly procedure and wear protective equipment.


  1. Install O-ring seal (7), O-ring seal (8), and O-ring seal (9) to collar (10). Install collar (10) and install boot (11).


    Illustration 2g01414609

  2. Install O-ring seal (6) and O-ring seal (5). Position control valve body (3). Install the washers and bolts (4).


    Illustration 3g01414506

    ------ WARNING! ------

    Improper assembly of parts that are spring loaded can cause bodily injury.

    To prevent possible injury, follow the established assembly procedure and wear protective equipment.


  3. Install O-ring seal (2) onto plug (1). Install plug (1) into control valve body (3).

End By:

  1. Install the brake control valve. Refer to Disassembly and Assembly, "Control Valve (Brake) - Install".