140M and 150 Motor Grader Steering Control Valve - Install Caterpillar


Steering Control Valve - Install
`
1.1. Installation Procedure

Installation Procedure

Table 1
Required Tools    
Tool     Part Number     Part Description     Qty    
A     311-1362     Vacuum Gauge Gp     1    


NOTICE

Keep all parts clean from contaminants.

Contaminants may cause rapid wear and shortened component life.





    Illustration 1g01404332

  1. Position steering control valve (11) . Install bolts (10) .



    Illustration 2g01404306

  1. Install tube assemblies (9) , (8) , (7) , and (6) .



    Illustration 3g01404279

  1. Connect tube assembly (4) .

  1. Connect hose assembly (5) .

  1. Connect tube assemblies (3) .



    Illustration 4g01413659

  1. Position cover (2) .

  1. Install bolts (1) . Repeat this step for the opposite side of the machine.



    Illustration 5g01397769

  1. Remove Tooling (A) .

  1. Release the parking brake.

End By: Disconnect the steering frame lock. Refer to Disassembly and Assembly, "Steering Frame Lock - Separate and Connect".

Information System:

140M and 150 Motor Graders Engine Supplement Radiator Guard and Support, Aftercooler, Hydraulic Oil Cooler, and Radiator, - Install
CP56, CS56, CP64, CS64, CP74 and CS74 Vibratory Compactors Propel System Pressure Override Valve (Drum Propel Pump) - Test and Adjust
R1600G Load Haul Dump Machine Electrical System Actual Gear Indicator
R1600G Load Haul Dump Machine Electrical System Engine Stop
R1600G Load Haul Dump Machine Electrical System Engine Start
R1600G Load Haul Dump Machine Electrical System Engine Start (Remote Control)
R1600G Load Haul Dump Machine Electrical System Autoshift Control (STIC Steering)
R1600G Load Haul Dump Machine Electrical System Heating and Air Conditioning
R1600G Load Haul Dump Machine Electrical System Main Power Relay
CB34, CB34XW and CC34 Utility Compactors Belts - Inspect/Adjust/Replace
R1600G Load Haul Dump Machine Systems Ejector Bucket - Disassemble
CP56, CS56, CP64, CS64, CP74 and CS74 Vibratory Compactors Propel System Relief Valve (Main, Axle Propel Pump) - Test and Adjust
CP56, CS56, CP64, CS64, CP74 and CS74 Vibratory Compactors Propel System Pressure Override Valve (Axle Propel Pump) - Test and Adjust
CP56, CS56, CP64, CS64, CP74 and CS74 Vibratory Compactors Propel System Piston Pump Neutral (Drum Propel Pump) - Adjust
140M and 150 Motor Grader Control Manifold (Steering Backup) - Remove
140M and 150 Motor Grader Control Manifold (Steering Backup) - Install
CB22, CB24, CB32 and CC24 Utility Compactors Safety Messages
CB22, CB24, CB32 and CC24 Utility Compactors Sound Information and Vibration Information
CB22, CB24, CB32 and CC24 Utility Compactors Specifications
CB22, CB24, CB32 and CC24 Utility Compactors Plate Locations and Film Locations
Air Conditioning and Heating R134a for All Caterpillar Machines Refrigerant Compressor
CP56, CS56, CP64, CS64, CP74 and CS74 Vibratory Compactors Propel System Piston Pump Neutral (Axle Propel Pump) - Adjust
CP56, CS56, CP64, CS64, CP74 and CS74 Vibratory Compactors Propel System Pump Control (Manual Displacement Control) Neutral (Drum Propel) - Test and Adjust
2007/10/01 A New Transmission Speed Sensor is Now Available for Series H-Series Motor Graders {3175}