PM-201 Cold Planer C18 Engine Supplement Engine Enclosure (Hood) - Remove and Install Caterpillar


Engine Enclosure (Hood) - Remove and Install
`
PM-201 Cold Planer C18 Engine Supplement [KENR5053]
FRAME AND BODY
ENCLOSURE GP
PM-201 Cold Planer C18 Engine Supplement Engine Enclosure (Hood) - Remove and Install
1.1. Removal Procedure
2.1. Installation Procedure

Removal Procedure

Table 1
Required Tools    
Tool     Part Number     Part Description     Qty    
A     138-7573     Link Brackets     2    



    Illustration 1g01420888

  1. Raise powered hood assembly (1) .

  1. Attach Tooling (A) and a suitable lifting device to hood assembly (1) .

  1. Turn the disconnect switch to the OFF position.



    Illustration 2g01420889

  1. Disconnect harness assembly (2) .



    Illustration 3g01420890

  1. Remove cotter pin (4) and pin (3). Repeat on the other side.

  1. Lower cylinder assembly (5) out of the way. Repeat on the other side.

  1. Lower the hood assembly to the closed position.



    Illustration 4g01420891

  1. Remove cotter pin (8), washer (7), and pin (6). Repeat for the other side.



    Illustration 5g01420919

  1. Remove hood assembly (1). The weight of hood assembly (1) is approximately 249 kg (550 lb).

Installation Procedure

Table 2
Required Tools    
Tool     Part Number     Part Description     Qty    
A     138-7573     Link Brackets     2    



    Illustration 6g01420919

  1. Attach Tooling (A) and a suitable lifting device to hood assembly (1). The weight of hood assembly (1) is approximately 249 kg (550 lb).

  1. Install hood assembly (1) .



    Illustration 7g01420891

  1. Install pin (6), washer (7), and cotter pin (8). Repeat for the other side.



    Illustration 8g01420890

  1. Raise the hood assembly to the open position.

  1. Raise cylinder assembly (5) into position. Install pin (3) and pin cotter (4). Repeat on the other side.



    Illustration 9g01420889

  1. Connect harness assembly (2) .



    Illustration 10g01420888

  1. Remove Tooling (A) and the lifting device from hood assembly (1) .

  1. Turn the disconnect switch to the ON position.

  1. Lower hood assembly (1) .

Information System:

PM-201 Cold Planer C18 Engine Supplement Coolant Tank - Remove and Install
PM-201 Cold Planer C18 Engine Supplement Battery and Battery Cable - Separate and Connect
PM-201 Cold Planer C18 Engine Supplement Battery - Remove and Install
PM-201 Cold Planer C18 Engine Supplement Alternator - Remove and Install
PM-201 Cold Planer C18 Engine Supplement Air Cleaner - Remove and Install
PM-201 Cold Planer C18 Engine Supplement Muffler - Remove and Install
160M and 160 Motor Grader Machine Systems Front Frame from Rear Frame (Articulating Hitch) - Separate
160M and 160 Motor Grader Machine Systems Front Frame to Rear Frame (Articulating Hitch) - Connect
938H Wheel Loader and IT38H Integrated Toolcarrier Hydraulic System Kickout and Positioner - Adjust
Arctic Conversion for the Engine in a 587R{1355, 1380}
2007/09/24 The Body Exhaust Arrangement is Updated {1061, 1062}
160M and 160 Motor Grader Machine Systems Fuel Tank - Remove
Assembly Procedure for the 789 X Body for Certain Off-Highway Trucks{7258, 7960}
160M and 160 Motor Grader Machine Systems Fuel Tank - Install
Machines Do Not Update in CAESoffice{7604, 7620}
Installation of the Power Shift Solenoid{5264, 5479}
CB34, CB34XW and CC34 Utility Compactors Safety Messages
CB34, CB34XW and CC34 Utility Compactors Operator Controls
C3.4 Engines for Caterpillar Built Machines Finding Top Center Position for No. 1 Piston
140M and 150 Motor Grader Power Train Differential Lock Valve - Remove and Install
160M and 160 Motor Grader Power Train Transmission Oil Cooler - Remove
CP56, CS56, CP64, CS64, CP74 and CS74 Vibratory Compactors Propel System Hydraulic System Pressure - Release
CP54B, CS54B and CS64B Vibratory Soil Compactors Propel System Propel System Troubleshooting
CP56, CS56, CP64, CS64, CP74 and CS74 Vibratory Soil Compactors Machine Systems Hydraulic Oil Contamination - Test