PM-201 Cold Planer C18 Engine Supplement Battery - Remove and Install Caterpillar


Battery - Remove and Install
`
1.1. Removal Procedure
2.1. Installation Procedure

Removal Procedure

  1. Turn the disconnect switch to the OFF position.



    Illustration 1g01420945

  1. Remove bolts (1) and raise hinged cover plate (2). Repeat the procedure on the other hinged cover plate.



    Illustration 2g01420947

  1. Disconnect negative battery cables (6) .

  1. Disconnect positive battery cables (5) .

  1. Remove nuts (3) and brackets (4).

  1. Use a suitable lifting device and remove batteries (7). The weight of batteries (7) is approximately 59 kg (130 lb).

Installation Procedure




    Illustration 3g01420947

  1. Use a suitable lifting device and install batteries (7). The weight of batteries (7) is approximately 59 kg (130 lb).

  1. Install brackets (4) and nuts (3) .

  1. Connect positive battery cables (5) .

  1. Connect negative battery cables (6) .



    Illustration 4g01420945

  1. Lower hinged cover plate (2) and install bolts (1). Repeat the procedure on the other hinged cover plate.

  1. Turn the disconnect switch to the ON position.

Information System:

PM-201 Cold Planer C18 Engine Supplement Alternator - Remove and Install
PM-201 Cold Planer C18 Engine Supplement Air Cleaner - Remove and Install
PM-201 Cold Planer C18 Engine Supplement Muffler - Remove and Install
160M and 160 Motor Grader Machine Systems Front Frame from Rear Frame (Articulating Hitch) - Separate
160M and 160 Motor Grader Machine Systems Front Frame to Rear Frame (Articulating Hitch) - Connect
938H Wheel Loader and IT38H Integrated Toolcarrier Hydraulic System Kickout and Positioner - Adjust
Arctic Conversion for the Engine in a 587R{1355, 1380}
2007/09/24 The Body Exhaust Arrangement is Updated {1061, 1062}
160M and 160 Motor Grader Machine Systems Fuel Tank - Remove
160M and 160 Motor Grader Power Train Front Axle - Remove
Correct Usage of the Oil Rail Plug for the Cylinder Head on C9 Engines{1100}
Transportation Information {7000}
PM-201 Cold Planer C18 Engine Supplement Battery and Battery Cable - Separate and Connect
PM-201 Cold Planer C18 Engine Supplement Coolant Tank - Remove and Install
PM-201 Cold Planer C18 Engine Supplement Engine Enclosure (Hood) - Remove and Install
Assembly Procedure for the 789 X Body for Certain Off-Highway Trucks{7258, 7960}
160M and 160 Motor Grader Machine Systems Fuel Tank - Install
Machines Do Not Update in CAESoffice{7604, 7620}
Installation of the Power Shift Solenoid{5264, 5479}
CB34, CB34XW and CC34 Utility Compactors Safety Messages
CB34, CB34XW and CC34 Utility Compactors Operator Controls
C3.4 Engines for Caterpillar Built Machines Finding Top Center Position for No. 1 Piston
140M and 150 Motor Grader Power Train Differential Lock Valve - Remove and Install
160M and 160 Motor Grader Power Train Transmission Oil Cooler - Remove