PM-201 Cold Planer C18 Engine Supplement Alternator - Remove and Install Caterpillar


Alternator - Remove and Install
`
PM-201 Cold Planer C18 Engine Supplement [KENR5053]
ELECTRICAL AND STARTING SYSTEM
ALTERNATOR GP-CHARGING
PM-201 Cold Planer C18 Engine Supplement Alternator - Remove and Install
1.1. Removal Procedure
2.1. Installation Procedure

Removal Procedure

  1. Turn the battery disconnect switch to the OFF position.



    Illustration 1g01420995

  1. Remove bolts (2) and access panel (1). Use two people to remove access panel (1) .



    Illustration 2g01420996

  1. Remove belt (3) .



    Illustration 3g01420997

  1. Remove the nut and cable harness (4) from alternator (7) .

  1. Remove the nut and cable harness (5) from alternator (7) .

  1. Remove the bolt and cable harness (6) from alternator (7) .

  1. Remove bolts (8) and alternator (7) .

Installation Procedure




    Illustration 4g01420997

  1. Install alternator (7) and bolts (8) .

  1. Install cable harness (6) and the bolt to alternator (7) .

  1. Install cable harness (5) and the nut to alternator (7) .

  1. Install cable harness (4) and the nut to alternator (7) .



    Illustration 5g01420996

  1. Install belt (3) .



    Illustration 6g01420995

  1. Use two people to install access panel (1). Install access panel (1) and bolts (2) .

  1. Turn the battery disconnect switch to the ON position.

Information System:

PM-201 Cold Planer C18 Engine Supplement Air Cleaner - Remove and Install
PM-201 Cold Planer C18 Engine Supplement Muffler - Remove and Install
160M and 160 Motor Grader Machine Systems Front Frame from Rear Frame (Articulating Hitch) - Separate
160M and 160 Motor Grader Machine Systems Front Frame to Rear Frame (Articulating Hitch) - Connect
938H Wheel Loader and IT38H Integrated Toolcarrier Hydraulic System Kickout and Positioner - Adjust
Arctic Conversion for the Engine in a 587R{1355, 1380}
2007/09/24 The Body Exhaust Arrangement is Updated {1061, 1062}
160M and 160 Motor Grader Machine Systems Fuel Tank - Remove
160M and 160 Motor Grader Power Train Front Axle - Remove
Correct Usage of the Oil Rail Plug for the Cylinder Head on C9 Engines{1100}
Transportation Information {7000}
IT38H Integrated Toolcarrier and 938H Wheel Loader Braking and Hydraulic Fan System Service Brake System Pressure - Test
PM-201 Cold Planer C18 Engine Supplement Battery - Remove and Install
PM-201 Cold Planer C18 Engine Supplement Battery and Battery Cable - Separate and Connect
PM-201 Cold Planer C18 Engine Supplement Coolant Tank - Remove and Install
PM-201 Cold Planer C18 Engine Supplement Engine Enclosure (Hood) - Remove and Install
Assembly Procedure for the 789 X Body for Certain Off-Highway Trucks{7258, 7960}
160M and 160 Motor Grader Machine Systems Fuel Tank - Install
Machines Do Not Update in CAESoffice{7604, 7620}
Installation of the Power Shift Solenoid{5264, 5479}
CB34, CB34XW and CC34 Utility Compactors Safety Messages
CB34, CB34XW and CC34 Utility Compactors Operator Controls
C3.4 Engines for Caterpillar Built Machines Finding Top Center Position for No. 1 Piston
140M and 150 Motor Grader Power Train Differential Lock Valve - Remove and Install