PM-201 Cold Planer C18 Engine Supplement Muffler - Remove and Install Caterpillar


Muffler - Remove and Install
`
PM-201 Cold Planer C18 Engine Supplement [KENR5053]
AIR INLET AND EXHAUST SYSTEM
MUFFLER GP
PM-201 Cold Planer C18 Engine Supplement Muffler - Remove and Install
1.1. Removal Procedure
2.1. Installation Procedure

Removal Procedure

  1. Turn the disconnect switch to the OFF position.



    Illustration 1g01421070

  1. Loosen clamp (2) and remove exhaust outlet (1) .



    Illustration 2g01421071

  1. Remove bolts (4) .

  1. Attach lifting straps and a suitable lifting device to cover (3). The weight of cover (3) is approximately 59 kg (130 lb). Remove cover (3) .



    Illustration 3g01421072

  1. Loosen clamp (5) .



    Illustration 4g01421073

  1. Attach lifting straps and a suitable lifting device to muffler (6). The weight of muffler (6) is approximately 50 kg (110 lb).

  1. Remove bolts (7) .

  1. Remove bolts (8) and the bracket assembly.

  1. Remove muffler (6) .

Installation Procedure




    Illustration 5g01421073

  1. Attach lifting straps and a suitable lifting device to muffler (6). The weight of muffler (6) is approximately 50 kg (110 lb).

  1. Install muffler (6) .

  1. Install the bracket assembly and bolts (8) .

  1. Install bolts (7). Tighten bolts (7) to a torque of 25 ± 7 N·m (18 ± 5 lb ft). Remove the lifting straps.



    Illustration 6g01421072

  1. Tighten clamp (5) .



    Illustration 7g01421071

  1. Attach lifting straps to cover (3). The weight of cover (3) is approximately 59 kg (130 lb). Install cover (3) .

  1. Install bolts (4) .



    Illustration 8g01421070

  1. Install exhaust outlet (1) and tighten clamp (2) .

  1. Turn the disconnect switch to the ON position.

Information System:

160M and 160 Motor Grader Machine Systems Front Frame from Rear Frame (Articulating Hitch) - Separate
160M and 160 Motor Grader Machine Systems Front Frame to Rear Frame (Articulating Hitch) - Connect
938H Wheel Loader and IT38H Integrated Toolcarrier Hydraulic System Kickout and Positioner - Adjust
Arctic Conversion for the Engine in a 587R{1355, 1380}
2007/09/24 The Body Exhaust Arrangement is Updated {1061, 1062}
160M and 160 Motor Grader Machine Systems Fuel Tank - Remove
160M and 160 Motor Grader Power Train Front Axle - Remove
Correct Usage of the Oil Rail Plug for the Cylinder Head on C9 Engines{1100}
Transportation Information {7000}
IT38H Integrated Toolcarrier and 938H Wheel Loader Braking and Hydraulic Fan System Service Brake System Pressure - Test
The Proper Procedures for Troubleshooting Mechanical Unit Injectors (MUI){1251, 1264, 1280, 1288, 1290}
140M and 150 Motor Graders Engine Supplement Rear Chassis Support - Install
PM-201 Cold Planer C18 Engine Supplement Air Cleaner - Remove and Install
PM-201 Cold Planer C18 Engine Supplement Alternator - Remove and Install
PM-201 Cold Planer C18 Engine Supplement Battery - Remove and Install
PM-201 Cold Planer C18 Engine Supplement Battery and Battery Cable - Separate and Connect
PM-201 Cold Planer C18 Engine Supplement Coolant Tank - Remove and Install
PM-201 Cold Planer C18 Engine Supplement Engine Enclosure (Hood) - Remove and Install
Assembly Procedure for the 789 X Body for Certain Off-Highway Trucks{7258, 7960}
160M and 160 Motor Grader Machine Systems Fuel Tank - Install
Machines Do Not Update in CAESoffice{7604, 7620}
Installation of the Power Shift Solenoid{5264, 5479}
CB34, CB34XW and CC34 Utility Compactors Safety Messages
CB34, CB34XW and CC34 Utility Compactors Operator Controls