140M and 150 Motor Grader Piston Pump (All Wheel Drive) - Install Caterpillar


Piston Pump (All Wheel Drive) - Install
`
1.1. Installation Procedure

Installation Procedure


NOTICE

Keep all parts clean from contaminants.

Contaminants may cause rapid wear and shortened component life.




    Illustration 1g01411162

  1. Attach suitable lifting devices to all wheel drive piston pump (9). The weight of all wheel drive piston pump (9) is approximately 111 kg (245 lb). Use the suitable lifting devices in order to position all wheel drive piston pump (9) to the machine.

  2. Install bolts (10). Install clips (11).


    Illustration 2g01411123

  3. Connect hose assemblies (8). Connect tube assemblies (7).


    Illustration 3g01411112

  4. Connect tube assemblies (6).

  5. Connect fitting (5).

  6. Connect hose assembly (4), hose assembly (3), and hose assembly (2).


    Illustration 4g01411099

  7. Connect hose assemblies (1).

End By:

  1. Install the rear chassis support. Refer to Disassembly and Assembly, "Rear Chassis Support - Install".

Information System:

938H Wheel Loader and IT38H Integrated Toolcarrier Hydraulic System Relief Valve (Line) - Test and Adjust
3500 Generator Sets Fuel System Secondary Filter - Replace
3176C Engine for the R1600G and the R1700G Load Haul Dumps Coolant Level - Test
3176C Engine for the R1600G and the R1700G Load Haul Dumps Cat Data Link - Test
140M and 150 Motor Grader Piston Pump (All Wheel Drive) - Remove
CP76 and CS76 Vibratory Compactors Propel System Pressure Override Valve (Axle Propel Pump) - Test and Adjust
CP76 and CS76 Vibratory Compactors Propel System Pressure Override Valve (Drum Propel Pump) - Test and Adjust
Parts Stock Cylinder Head Assemblies with Rust Preventative Applied{1100}
Multiple Registration Messages Occur with Product Link{733T, 7606}
561N Pipelayer Maintenance Interval Schedule
CP76 and CS76 Vibratory Compactors Propel System Piston Motor Flushing Valve (Axle) - Test and Replace
CS56, CS64, CS74, CS76, CP56, CP64, CP74 and CP76 Vibratory Soil Compactors Parking Brake - Check
2007/12/03 The Exhaust Pipe Groups are Updated {1061}
140M and 150 Motor Graders Engine Supplement Rear Chassis Support - Remove
2007/09/10 A New Lip Seal Is Now Used {3256, 3258, 3278, 7555}
140M and 150 Motor Grader Cab - Remove
140M and 150 Motor Grader Cab - Install
140M and 150 Motor Graders Engine Supplement Rear Chassis Support - Install
The Proper Procedures for Troubleshooting Mechanical Unit Injectors (MUI){1251, 1264, 1280, 1288, 1290}
IT38H Integrated Toolcarrier and 938H Wheel Loader Braking and Hydraulic Fan System Service Brake System Pressure - Test
Transportation Information {7000}
Correct Usage of the Oil Rail Plug for the Cylinder Head on C9 Engines{1100}
160M and 160 Motor Grader Power Train Front Axle - Remove
160M and 160 Motor Grader Machine Systems Fuel Tank - Remove