Introduction
`
3054E Industrial Engine
[RENR7568]
Show/hide table
| |
| Illustration 1 | g01139983 |
|
Rear and left side view of the 3054E engine (1) Electronic Control Module (ECM) (2) Fuel priming pump (3) Fuel filter housing (4) Intake manifold temperature sensor (5) Intake manifold pressure sensor (6) Cylinder head (7) Engine oil cooler (8) Flywheel housing (9) Flywheel (10) Fuel injection pump (11) Engine oil filter (12) Engine oil pressure sensor (13) Primary speed/timing sensor | |
Show/hide table
| |
| Illustration 2 | g01139988 |
|
Front and right side view of the 3054E engine (14) Exhaust manifold (15) Coolant temperature sensor (16) Crankcase breather (17) Water temperature regulator housing (18) Fan (19) Alternator (20) Crankshaft pulley (21) Electric starting motor (22) Wastegate (23) Front timing case (24) Engine oil pan (25) Turbocharger | |
The four cylinder 3054E is a diesel engine that is electronically controlled. The engine conforms to current emissions requirements.
The front of the engine is opposite the flywheel end of the engine. The left side and the right side of the engine are determined from the flywheel end. No. 1 cylinder is the front cylinder of the engine.
The four cylinders are arranged in-line. The engine uses an Electronic Control Module (ECM) to control the fuel injection pump.
The engines have been designed for many different applications. The engines are available in three different types of aspiration.
- Naturally aspirated
- Turbocharged
- Turbocharged aftercooled
Information System:
AP-1000D, AP-1055D, AP-655C, BG-2255C, BG-2455D and BG-260D Asphalt Pavers
MID 030 - CID 0821 - FMI 04
AP-1000D, AP-1055D, AP-655C, BG-2255C, BG-2455D and BG-260D Asphalt Pavers
MID 030 - CID 0821 - FMI 03
AP-655C and BG-2255C Asphalt Pavers Propel System
Piston Pump Flow - Test
AP-1000D, AP-1055D, AP-655C, BG-2255C, BG-2455D and BG-260D Asphalt Pavers
MID 030 - CID 0819 - FMI 02
IT38G Series II Integrated Toolcarrier and 938G Series II Wheel Loader
Visual Inspection
IT38G Series II Integrated Toolcarrier and 938G Series II Wheel Loader
Operational Checks (Hydraulic System)
AP-1000D, AP-1055D, AP-655C, BG-2255C, BG-2455D and BG-260D Asphalt Pavers
MID 030 - CID 0600 - FMI 04
3524B Engine for Caterpillar Built Machines
Camshaft - Remove
773D, 773E, 775D and 775E Off-Highway Trucks Machine Systems
Summary of Revisions
Product Link 151/201
Reference Parts Information
TK711, TK721, TK722 and TK732 Track Feller Bunchers Hydraulic System
Parking Brake (Travel)
AP-1000D, AP-1055D, AP-655C, BG-2255C, BG-2455D and BG-260D Asphalt Pavers
MID 030 - CID 0324 - FMI 06
3524B Engine for Caterpillar Built Machines
Camshaft - Install
D350E and D400E Articulated Trucks Power Train
Center Axle
G3304 and G3306 Engines
Visual Inspection
14H and 16H Motor Graders Power Train
Introduction
AP-1000D, AP-1055D, AP-655C, BG-2255C, BG-2455D and BG-260D Asphalt Pavers
Monitoring System - Self Test
Installation of New Restriction Orifice for the Unit Injector Pump
AP-1000D, AP-1055D, AP-655C, BG-2255C, BG-2455D and BG-260D Asphalt Pavers
Electrical Connector - Inspect
3054E Industrial Engine
Basic Engine
AP-1000D, AP-1055D, AP-655C, BG-2255C, BG-2455D and BG-260D Asphalt Pavers
Main Display Module Initialization - Adjust
Installation Instructions for the Machine Security System on the Small Wheel Loaders{7631}
3524B Engine for Caterpillar Built Machines
Accessory Drive (Front) - Remove
AP-1000D, AP-1055D, AP-655C, BG-2255C, BG-2455D and BG-260D Asphalt Pavers
Connector Contact Description