Product Link 151/201 System Components Caterpillar


System Components
`
1.1. GPS Antenna and Satellite Communication Antenna
2.1. Wiring Harness
3.1. Shock Mounting Kit

GPS Antenna and Satellite Communication Antenna




Illustration 1g00807125

Antenna for stud mount and antenna for magnetic mount




Illustration 2g00656419

(1) Satellite Communication Antenna Lead

(2) Lead for the GPS Antenna




Illustration 3g00809868

207-6136 Plate (Mounting)

The antenna is an antenna for the global positioning system and a satellite communication antenna. There are six possible antennas. Two antennas have 6.1 m (20 ft) cables. Two antennas have 0.91 m (3 ft) cables. One antenna with each cable length is available for mounting on a bracket (stud mount). One antenna with each cable length is available for magnetic mounting. The 207-6136 Plate (Mounting) is available for suitable installations. This plate is shown in illustration 3. If this plate is not suitable, a mounting plate may be fabricated in order to mount the antenna.

Wiring Harness




Illustration 4g00656427

(3) 8-Pin Connector (External Sensors)

(4) 24-Pin Connector (Product Link Module)

(5) 9-Pin Connector (AVS Data Link)

(6) Power, ground, switched power, and Alternator R-Terminal wires

The 207-6795 Installation Kit includes the 170-7142 Control Harness As. The wiring harness is enclosed in a protective braided cover.

Shock Mounting Kit




Illustration 5g00807118

The Product Link module requires shock mounting in certain applications. All track-type machines require shock mounting. The shock mounting is not required when the Product Link Module is installed in a shock mounted cab on a wheeled machine. When the Product Link Module is installed on a wheeled machine, OUTSIDE of a shock mounted cab, the shock mount must be installed. See Operation Section, "Installation" for more information. The components for shock mounting are packaged together in a kit. The kit is shown in illustration 5.

Information System:

Product Link 151/201 Electronic Control Module (ECM)
R2900 Load Haul Dump Lift Arm and Cylinder Bearings - Lubricate
14H Motor Grader Machine Systems Blade - Install
CP-563E, CP-573E, CS-563E, CS-573E and CS-583E Vibratory Soil Compactors Vibratory System Bypass Valve (Return Manifold)
120H and 135H Motor Graders Machine Systems Swivel - Assemble
120H and 135H Motor Graders Machine Systems Swivel - Disassemble
D350E and D400E Articulated Trucks Power Train Front Axle
CP-563E, CP-573E, CS-563E, CS-573E and CS-583E Vibratory Soil Compactors Vibratory System Piston Pump (Vibratory System)
CP-563E, CP-573E, CS-563E, CS-573E and CS-583E Vibratory Soil Compactors Vibratory System Piston Motor (Vibratory System)
14H Motor Grader Machine Systems Swivel - Install
CP-563E, CP-573E, CS-563E, CS-573E and CS-583E Vibratory Soil Compactors Vibratory System Support and Vibratory Drive
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Hydraulic System Gear Motor (Hydraulic Fan)
Product Link 151/201 Spare Inputs
322C Forest Machine Hydraulic System Fan Motor Speed (Hydraulic Oil Cooler) - Test and Adjust
Product Link 151/201 General Information
533 and 543 Wheel Feller Bunchers Machine Systems Solenoid Valve and Manifold (Disc Saw) - Remove and Install
533 and 543 Wheel Feller Bunchers Machine Systems Combination Valve (Pilot, Brake, and Steering) - Remove
533 and 543 Wheel Feller Bunchers Machine Systems Combination Valve (Pilot, Brake, and Steering) - Install
R2900 Load Haul Dump Radiator Core - Clean
AP-1000D, AP-1055D, AP-655C, BG-2255C, BG-2455D and BG-260D Asphalt Pavers MID 039 - CID 0151 - FMI 03
AP-1000D, AP-1055D, AP-655C, BG-2255C, BG-2455D and BG-260D Asphalt Pavers MID 039 - CID 0151 - FMI 05
AP-1000D, AP-1055D, AP-655C, BG-2255C, BG-2455D and BG-260D Asphalt Pavers MID 039 - CID 0151 - FMI 06
AP-1000D, AP-1055D, AP-655C, BG-2255C, BG-2455D and BG-260D Asphalt Pavers MID 039 - CID 0291 - FMI 03
AP-1000D, AP-1055D, AP-655C, BG-2255C, BG-2455D and BG-260D Asphalt Pavers MID 039 - CID 0291 - FMI 05