CP56, CS56, CP64, CS64, CP74 and CS74 Vibratory Compactors Propel System Hydraulic Oil Filter (Charge) Caterpillar


Hydraulic Oil Filter (Charge)
`
CP56, CS56, CP64, CS64, CP74 and CS74 Vibratory Compactors Propel System [KENR5721]
HYDRAULIC SYSTEM
FILTER GP
CP56, CS56, CP64, CS64, CP74 and CS74 Vibratory Compactors Propel System Hydraulic Oil Filter (Charge)


Illustration 1g01415881
Left Side of Machine
(1) Front charge filter
(2) Rear charge filter

The hydraulic filters are located under the operator platform on the left side of the machine.

Charge oil from the steering hydraulic system flows through front charge filter (1). This oil is directed to the vibrator pump and to the drum pump. Charge oil from the fan hydraulic system flows through rear charge filter (2) to the axle pump and to the shift solenoid.

The housing of each charge filter contains a bypass valve. If the pressure differential across the filter is greater than 350 kPa (51 psi), the bypass valve opens. When the bypass valve is open, charge oil flows to the hydraulic tank. As a result, the charge oil bypasses the hydrostatic loop.



Illustration 2g01415882
Left Side of Machine
(3) Pressure switch

Pressure switch (3) is installed in the outlet line of the front charge filter. Contact "A" of the pressure switch is connected to the common return line at terminal "J1-35" of the engine ECM. Contact "B" of the switch is connected to terminal "J1-45" of the engine ECM.

On start-up, the switch closes when the pressure reaches 1400 kPa (203 psi). During operation of the machine the switch will open and the indicator will illuminate when the pressure is less than 1100 kPa (160 psi). The indicator will remain illuminated until the pressure reaches 1400 kPa (203 psi).

Information System:

C32 Engine for D11T Track-Type Tractors Cooling Fan Control - Test
CP56, CS56, CP64, CS64, CP74 and CS74 Vibratory Compactors Propel System Hydraulic Tank
CP56, CS56, CP64, CS64, CP74 and CS74 Vibratory Compactors Propel System Propel System Components
CP56, CS56, CP64, CS64, CP74 and CS74 Vibratory Compactors Propel System Operator Controls (Propel System)
C32 Engine for D11T Track-Type Tractors Coolant Flow - Test
120M and 12M Motor Grader Machine Systems Blade Lift Arm - Install
140M and 150 Motor Grader Secondary Steering Pump and Motor - Remove
CP56, CS56, CP64, CS64, CP74 and CS74 Vibratory Soil Compactors Machine Systems Relief Valve (Blade) - Test and Adjust
CP56, CS56, CP64, CS64, CP74 and CS74 Vibratory Soil Compactors Machine Systems Fan Motor Speed (Radiator Cooling) - Test and Adjust
2007/09/17 New Cab Temperature Control Potentiometer Is Now Available {5721}
C32 Engine for D11T Track-Type Tractors Cat Data Link - Test
2009/03/02 A New Hose Is Now Used {1052, 1307}
120M and 12M Motor Grader Machine Systems Articulation Cylinder - Remove and Install - Left Side
CP56, CS56, CP64, CS64, CP74 and CS74 Vibratory Compactors Propel System Piston Pump (Propel)
140M and 150 Motor Grader Secondary Steering Pump and Motor - Install
Field Installation of the Traction Control System for the 770, and 772 Off-Highway Trucks{1408, 3288, 4257, 4294, 4801, 4811, 5057, 7610, 7620, 7960}
CP56, CS56, CP64, CS64, CP74 and CS74 Vibratory Compactors Propel System Piston Motor (Drum Propel)
140M and 150 Motor Grader Piston Pump (Hydraulic Fan) - Remove
CP54 and CS54 Vibratory Soil Compactors Machine Systems Relief Valve (Main, Vibratory) - Test and Adjust
2570C and 2670C Wheel Feller Bunchers Engine Air Filter Secondary Element - Replace
770 and 772 Off-Highway Trucks Power Train Final Drive - Remove
770 and 772 Off-Highway Trucks Power Train Final Drive - Install
770 and 772 Off-Highway Trucks Power Train Final Drive - Disassemble
770 and 772 Off-Highway Trucks Power Train Final Drive - Assemble