D350E and D400E Articulated Trucks Power Train Lockup Clutch and Solenoid Valve Caterpillar


Lockup Clutch and Solenoid Valve
`
D350E and D400E Articulated Trucks Power Train [SENR8676]
ELECTRICAL AND STARTING SYSTEM
VALVE GP
D350E and D400E Articulated Trucks Power Train Lockup Clutch and Solenoid Valve
1.1. 8E-0756 Lockup Clutch and Solenoid Valve

8E-0756 Lockup Clutch and Solenoid Valve




Illustration 1g00931543

(1) Torque for the bolt ... 30 ± 4 N·m (22 ± 3 lb ft)

(2) Torque for the 4 bolts ... 30 ± 7 N·m (22 ± 5 lb ft)

(3) Torque for the 3 bolts ... 30 ± 4 N·m (22 ± 3 lb ft)

(4) Torque for the 2 bolts ... 30 ± 7 N·m (22 ± 5 lb ft)

(5) Torque for the 3 plugs ... 25 ± 5 N·m (18 ± 4 lb ft)

(6) Torque for the plug ... 5.5 ± 1.5 N·m (4.0 ± 1.0 lb ft)

(7) Torque for the 3 plugs ... 70 ± 7 N·m (52 ± 5 lb ft)

(8) Torque for the plug ... 25 ± 5 N·m (18 ± 4 lb ft)

(9) Torque for the plug ... 5.5 ± 1.5 N·m (4.0 ± 1.0 lb ft)

(10) Torque for the bolt ... 30 ± 4 N·m (22 ± 3 lb ft)

(11) Torque for the 3 plugs ... 5.5 ± 1.5 N·m (4.0 ± 1.0 lb ft)

(12) Torque for the plug ... 70 ± 7 N·m (52 ± 5 lb ft)

(13) 9W-7410 Spring

Color code ... Three light blue stripes
First test:
Length under test force ... 79.5 mm (3.13 inch)
Test force ... 78 ± 4 N (18 ± 1 lb)
Second test
Length under test force ... 63.0 mm (2.48 inch)
Test force ... 237 ± 9 N (53 ± 2 lb)
Free length after test ... 87.6 mm (3.45 inch)
Outside diameter ... 14.7 mm (0.58 inch)

(14) 4M-2381 Springs

Quantity ... two
Length under test force ... 12.2 mm (.48 inch)
Test force ... 2.3 ± .2 N (.52 ± .04 lb)
Free length after test ... 22.6 mm (.89 inch)
Outside diameter ... 7.62 mm (.30 inch)

(15) Shims

Thickness of one 5J-2721 Shim ... 0.13 mm (.005 inch)
One 5J-2721 Shim will change the pressure approximately. ... 13 kPa (2.0 psi)
Thickness of one 6J-3993 Shim ... 0.25 mm (.010 inch)
One 6J-3993 Shim will change the pressure approximately. ... 26 kPa (4.0 psi)
Thickness of one 5J-1036 Shim ... 0.8 mm (.03 inch)
One 5J-1036 Shim will change the pressure approximately. ... 81 kPa (12 psi)

(16) 8P-5058 Spring

Length under test force ... 25.4 mm (1.00 inch)
Test force ... 54 N (12 lb)
Free length after test ... 32.5 mm (1.28 inch)
Outside diameter ... 15.24 mm (.600 inch)

(17) Shims

Thickness of one 8J-4452 Shim ... 0.12 mm (.005 inch)
One 8J-4452 Shim will change the pressure approximately. ... 33 kPa (5.0 psi)
Thickness of one 2S-0675 Shim ... 0.40 mm (.016 inch)
One 2S-0675 Shim will change the pressure approximately. ... 77 kPa (11 psi)
Thickness of one 9J-1330 Shim ... 0.79 mm (.031 inch)
One 9J-1330 Shim will change the pressure approximately. ... 143 kPa (21 psi)

(18) 9P-0683 Spring

Length under test force ... 25.4 mm (1.00 inch)
Test force ... 35.6 ± 2.8 N (8.00 ± .60 lb)
Free length after test ... 66.04 mm (2.600 inch)
Outside diameter ... 21.4 mm (.84 inch)

(19) 6Y-7267 Spring

Color code ... Red stripe
Length under test force ... 65.0 mm (2.56 inch)
Test force ... 55 ± 3 N (12 ± 1 lb)
Free length after test ... 96.1 mm (3.78 inch)
Outside diameter ... 8.12 mm (.320 inch)

(20) 8P-9738 Load Piston Orifice

Orifice thickness ... 4.58 mm (.180 inch)

Information System:

574B Forwarder Power Train Accelerator Pedal
3054E Industrial Engine Camshaft Bearings - Remove and Install
793C and 793C XQ Off-Highway Truck Steering System Steering Linkage and Cylinder Mounting
3512 and 3516 EUI Engines for 784B, 785B, 789B and 793B Off-Highway Trucks ECM Output Circuit (Engine Coolant Temperature Lamp)
3512 and 3516 EUI Engines for 784B, 785B, 789B and 793B Off-Highway Trucks ECM Output Circuit (Engine Oil Pressure Lamp)
3512 and 3516 EUI Engines for 784B, 785B, 789B and 793B Off-Highway Trucks ECM Output Circuit (Engine ON Signal)
AP-1000D, AP-1055D, AP-655C, BG-2255C, BG-2455D and BG-260D Asphalt Pavers MID 039 - CID 0975 - FMI 08
574B Forwarder Power Train Monitoring System
773D, 773E, 775D and 775E Off-Highway Trucks Machine Systems Piston Pump (Steering) - Disassemble
773D, 773E, 775D and 775E Off-Highway Trucks Machine Systems Piston Pump (Steering) - Assemble
3054C Industrial Engine and C4.4 Marine Auxiliary Generator Set Fuel System Pressure - Test
3054C Industrial Engine and C4.4 Marine Auxiliary Generator Set Fuel System - Prime
574B Forwarder Power Train On/Off Switches
CB-634D Paving Compactor Machine Electronic Control System Service Tools
14H Motor Grader Machine Systems Blade Lift Cylinder - Remove and Install
Test Sequence for Capsule Type Fuel Nozzles{0782}
14H Motor Grader Machine Systems Wheel Lean Bar - Remove and Install
Bench Test Procedure for Hydraulic Piston Pumps{5070}
Bench Test Procedure for Hydraulic Piston Pumps {4268, 4306, 5070}
14H Motor Grader Machine Systems Combination Valve - Remove
TK711, TK721, TK722 and TK732 Track Feller Bunchers Hydraulic System Pump Control (Output Flow) - Adjust
14H Motor Grader Machine Systems Bank Valve - Remove
14H Motor Grader Machine Systems Bank Valve - Install
2002/10/28 Examine Failed Starting Motors to Understand the Reason for Failure {1453}