129-0383 Front Axle
 | |
| Illustration 1 | g00928665 |
(1) 9M-5874 Shim Pack
10 Shims ... 0.08 mm (0.003 inch)
20 Shims ... 0.13 mm (0.005 inch)
Note: Shims must be free of dents and shims must be free of wrinkles.
(2) Torque of drain plug ... 70 ± 15 N·m (52 ± 11 lb ft)
(3) Torque of drain plug ... 70 ± 15 N·m (52 ± 11 lb ft)
(4) Torque the 4 bolts to 200 ± 20 N·m (148 ± 15 lb ft). Turn an additional 60° ± 5°.
(5) Set the end of the pin within 2.4 ± 0.8 mm (0.09 ± 0.03 inch) of the disc. Then tighten the set screw in order to hold the pin in place.
(6) Torque the 28 bolts to 200 ± 20 N·m (148 ± 15 lb ft). Turn an additional 60° ± 5°.
(7) Torque the 36 bolts to 200 ± 20 N·m (148 ± 15 lb ft). Turn an additional 60° ± 5°.
123-4852 Front Axle
 | |
| Illustration 2 | g00928847 |
(1) 9M-5874 Shim Pack
10 Shims ... 0.08 mm (0.003 inch)
20 Shims ... 0.13 mm (0.005 inch)
Note: Shims must be free of dents and shims must be free of wrinkles.
(2) Torque of drain plug ... 70 ± 15 N·m (52 ± 11 lb ft)
(3) Torque of drain plug ... 70 ± 15 N·m (52 ± 11 lb ft)
(4) Torque the 28 bolts to 200 ± 20 N·m (148 ± 15 lb ft). Turn an additional 60° ± 5°.
(5) Torque the 2 bolts to 200 ± 20 N·m (148 ± 15 lb ft). Turn an additional 60° ± 5°.
(6) Set the end of the pin within 2.4 ± 0.8 mm (0.09 ± 0.03 inch) of the disc. Then tighten the set screw in order to hold the pin in place.
(7) Torque the 2 bolts to 200 ± 20 N·m (148 ± 15 lb ft). Turn an additional 60° ± 5°.
(8) Torque the 36 bolts to 200 ± 20 N·m (148 ± 15 lb ft). Turn an additional 60° ± 5°.