938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Braking System Service Brakes Caterpillar


Service Brakes
`
938G Series II Wheel Loader and IT38G Series II <BR>Integrated Toolcarrier Braking System [RENR6073]
POWER TRAIN
AXLE GP
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Braking System Service Brakes



Illustration 1g00103511

End View of the Service Brakes




Illustration 2g00917951

View A-A

(1) Thickness of a new 4E-2168 Piston ... 42 ± 0.13 mm (1.65 ± .01 inch)

(2) Thickness of a 6Y-2082 Friction Disc

New disc ... 9.1 ± 0.13 mm (.358 ± .005 inch)
Worn disc ... 7.65 mm (.301 inch)

(3) Thickness of new 9C-6329 Reaction Plate ... 16 ± 0.13 mm (.63 ± .01 inch)

Reference: For more information on measuring the thickness of a friction disc, refer to Testing and Adjusting, "Service Brake Wear Indicator - Check" for the machine that is being serviced.




Illustration 3g00917954

View B-B

(4) 4E-2167 Springs (two)

Length under test force ... 20.5 mm (.81 inch)
Test force ... 292 N (65.6 lb)
Free length after test ... 26.22 mm (1.03 inch)
Outside diameter ... 22.47 mm (.88 inch)



Illustration 4g00917959

Detail C

(5) 4E-2167 Spring

Length under test force ... 20.5 mm (.81 inch)
Test force ... 292 N (65.6 lb)
Free length after test ... 26.22 mm (1.03 inch)
Outside diameter ... 22.47 mm (.88 inch)

(6) Apply 4C-9507 Retaining Compound to the outside diameter of the dowel prior to installation. Make sure that the dowel is against the bottom of the dowel hole.

(7) Torque for the bolt ... 0.45 ± 0.05 N·m (4.0 ± .4 lb in)

(8) Heavily lubricate the entire seal with the lubricant that is being sealed.

(9) Heavily lubricate the entire pin with the lubricant that is being sealed.

Information System:

R2900 Load Haul Dump Hydraulic System Oil Filter - Replace
R2900 Load Haul Dump Hydraulic System Oil - Change
D350E and D400E Articulated Trucks Power Train Rear Drive Shaft
2002/10/21 New Electronic Control Modules Used on Machine Engines {1901}
CP-563E, CP-573E, CS-563E, CS-573E and CS-583E Vibratory Soil Compactors Propel System Control Valve (Shift)
R2900 Load Haul Dump Hydraulic Line Screen - Clean
3524B Engine for Caterpillar Built Machines Water Temperature Regulators - Remove
R2900 Load Haul Dump Fuel Tank Cap and Strainer - Clean
R2900 Load Haul Dump Fuel System Water Separator - Drain
797 Off-Highway Truck Fan Drive Hydraulic System Fan - Calibrate
R2900 Load Haul Dump Fuel System Secondary Filter - Replace
C9 On-Highway Engines Lubrication System
3524B Engine for Caterpillar Built Machines Water Temperature Regulators - Install
CP-563E, CP-573E, CS-563E, CS-573E and CS-583E Vibratory Soil Compactors Machine Systems Steering, Fan and Leveling Blade System
C-9 Engine for Caterpillar Built Machines Ether Injection System - Test
AP-1000D, AP-1055D, AP-655C, BG-2255C, BG-2455D and BG-260D Asphalt Pavers MID 039 - CID 1703 - FMI 03
CP-563E, CP-573E, CS-563E, CS-573E and CS-583E Vibratory Soil Compactors Propel System Axle
CP-563E, CP-573E, CS-563E, CS-573E and CS-583E Vibratory Soil Compactors Propel System Final Drive Planetary (Drum Propel)
AP-1000D, AP-1055D, AP-655C, BG-2255C, BG-2455D and BG-260D Asphalt Pavers MID 039 - CID 1703 - FMI 05
AP-1000D, AP-1055D, AP-655C, BG-2255C, BG-2455D and BG-260D Asphalt Pavers MID 039 - CID 1703 - FMI 06
CP-563E, CP-573E, CS-563E, CS-573E and CS-583E Vibratory Soil Compactors Propel System Piston Pump (Axle Propel and Drum Propel)
CP-563E, CP-573E, CS-563E, CS-573E and CS-583E Vibratory Soil Compactors Propel System Piston Motor (Axle Propel)
AP-1000D, AP-1055D, AP-655C, BG-2255C, BG-2455D and BG-260D Asphalt Pavers MID 039 - CID 1704 - FMI 03
AP-1000D, AP-1055D, AP-655C, BG-2255C, BG-2455D and BG-260D Asphalt Pavers MID 039 - CID 1704 - FMI 05