793B Off-Highway Truck Hydraulic System Body Mounting Caterpillar

Body Mounting
793B Off-Highway Truck Hydraulic System [SENR6316]
793B Off-Highway Truck Hydraulic System Body Mounting

Illustration 1g00103088

Illustration 2g00103089

View A-A

Illustration 3g00103090

Detail B

(1) 8X-3045 Pad Assembly

(2) 8X-3046 Shim

Thickness ... 2.0 mm (0.08 inch)

(3) Guide assembly

(E) Distance from the front support on the truck body to guide assembly (3) ... 10.0 ± 1.0 mm (0.39 ± 0.04 inch)

Note: Do not weld guide assemblies (3) in place until the truck body has been installed on the chassis.

Illustration 4g00103091

View C-C

(4) Bracket

(5) Electronic control group

(6) Magnet assembly

Adjust bracket (4) in order to get the correct distance (F) between magnet assembly (6) and electronic control group (5) .

(F) Correct distance ... 8.0 ± 2.0 mm (0.32 ± 0.08 inch)

Illustration 5g00103092

View D-D

(7) Use 8W-2896 Washer (6 mm (0.2 inch)) only if 6G-9697 Washer (10 mm (0.4 inch)) will not assemble in two places.

Note: Refer to Hydraulic Testing and Adjusting, "Pad Assembly (Dump Body) - Install and Adjust" in order to install the pad assemblies and adjust the pad assemblies.