793B Off-Highway Truck Steering System Steering Linkage and Cylinder Mounting Caterpillar


Steering Linkage and Cylinder Mounting
`
793B Off-Highway Truck Steering System [SENR6337]
STEERING SYSTEM
CYLINDER GP
793B Off-Highway Truck Steering System Steering Linkage and Cylinder Mounting
793B Off-Highway Truck Steering System Steering Cylinder



Illustration 1g00927724

Typical top view of the steering linkage




Illustration 2g00927726

View A-A

(1) Clamp Assembly

(2) Rod for steering link

(A) 6.350 ± 1.530 mm (0.25 ± 0.06 inch)




Illustration 3g00927727

Section C-C

(1) Clamp assembly

(2) Rod for the steering link

(3) Nut

Note: The opening for the clamp assembly (1) must be aligned with the slots in the rod (2) for the steering link, as shown.

(3) Torque for nut ... 583 ± 27 N·m (430 ± 20 lb ft)




Illustration 4g01108483

View B-B

(4) 8W-5396 Shim

Thickness ... 1.0 mm (0.04 inch)
Clearance between the top side of the steering arm and the frame ... 0.7 ± 0.6 mm (0.03 ± 0.02 inch)



Illustration 5g01108494

Section D-D

Note: Use 4C-5593 Anti-Seize Compound in order to lubricate the components. Lubricate the taper and the threads of the ball studs. Also, lubricate the washer face of the nuts.

(5) Torque for the four nuts that are located on the ball studs (6) of the cylinder mounting ... 2550 ± 100 N·m (1881 ± 74 lb ft)

(6) Ball stud




Illustration 6g00927733

Typical top view of the steering cylinders




Illustration 7g01108542

View E-E




Illustration 8g01108547

Section F-F

Note: Use 4C-5593 Anti-Seize Compound in order to lubricate the components. Lubricate the taper and the threads of the ball joint studs. Also, lubricate the washer face of the nuts.

(7) Torque for four nuts that are located on the ball studs (9) of the steering linkage ... 2550 ± 100 N·m (1880 ± 74 lb ft)

(8) Install the dust cover dry.

(9) Ball stud

Note: Refer to Testing and Adjusting, "Front Wheel - Align" for additional information.

Information System:

M318 and M320 Excavators Final Drive Oil - Change
3208 Marine Engine Battery Electrolyte Level - Check
TK711, TK721, TK722 and TK732 Track Feller Bunchers Sound Information and Vibration Information
561M Pipelayer Parking Brake Control
793B Off-Highway Truck Steering System Steering Tank and Filter
12H, 140H, 143H, 160H and 163H Motor Graders Power Train Transmission
561M Pipelayer Cooling System Water Temperature Regulator - Clean/Replace
515 Wheel Skidder and 525 Wheel Skidder Conventional Coolant/Antifreeze Cooling System Maintenance
561M Pipelayer Tracks
561M Pipelayer Track Rollers - Single Flange and Double Flange
120H and 135H Motor Graders Tire Inflation with Nitrogen
322B, 322B L, 325B and 325B L Excavators Lubricant Viscosities - Fluids Recommendations
793B Off-Highway Truck Steering System Steering Cylinder
793B Off-Highway Truck Air System and Brakes Front Wheel
3208 Marine Engine English (SAE) Fasteners
793B Off-Highway Truck Air System and Brakes Brake Valve (Parking and Secondary)
D6M Track-Type Tractor Power Train Track Rollers - Single Flange and Double Flange
793B Off-Highway Truck Hydraulic System Body Mounting
3208 Marine Engine Maintenance Log
3208 Marine Engine Standard Torque for Worm Drive Band Hose Clamps
3208 Marine Engine Metric (ISO) Fasteners
793C and 793C XQ Off-Highway Truck Hydraulic System Gear Pump (Hoist and Front Brake Cooling)
3208 Marine Engine Hose Clamps
784C, 785C and 785C HAA Off-Highway Truck/Tractors Hydraulic System Position Sensor (Hoist Control)