12H, 140H, 143H, 160H and 163H Motor Graders Hydraulic and Steering System Control Valve (Snow Plow/Dozer Lift) Caterpillar


Control Valve (Snow Plow/Dozer Lift)
`



Illustration 1g01388239

A cross section of the control valve with backup ring (6)




Illustration 2g01962612

A cross section of the control valve without backup ring (6)

(1) Torque for two check valve groups ... 80 ± 4 N·m (60 ± 3 lb ft)

(2) Lightly lubricate the O-ring seals with the lubricant that is being sealed.

(3) Torque for pipe plug ... 35 ± 7 N·m (26 ± 5 lb ft)

(4) Torque for relief valve group ... 35 ± 3 N·m (26 ± 2 lb ft)

(5) Lightly lubricate the O-ring seals with the lubricant that is being sealed.

(6) Lightly lubricate the backup rings with the lubricant that is being sealed.

(7) 111-8233 Spring

Length under test force ... 15.50 mm (0.610 inch)
Test force ... 13.50 ± 0.80 N (3.0 ± 0.2 lb)
Free length after test ... 25.60 mm (1.008 inch)
Outside diameter ... 15.00 mm (0.591 inch)

(8) 6E-5153 Spring

Length under test force ... 14.00 mm (0.551 inch)
Test force ... 18.00 ± 1.44 N (4.0 ± 0.3 lb)
Free length after test ... 18.38 mm (0.724 inch)
Outside diameter ... 7.2 mm (0.28 inch)

(9) Seat the ball gently into the valve body at assembly.

(10) 6E-3007 Spring

Length under test force ... 8.60 mm (0.339 inch)
Test force ... 0.234 ± 0.024 N (0.1 ± 0.0 lb)
Free length after test ... 10.00 mm (0.394 inch)
Outside diameter ... 4.6 mm (0.18 inch)

(11) 102-7412 Spring

Length under test force ... 28.00 mm (1.102 inch)
Test force ... 46.00 ± 2.40 N (10.3 ± 0.5 lb)
Free length after test ... 48.417 mm (1.9062 inch)
Outside diameter ... 18.20 mm (0.717 inch)

(12) Torque for lever ... 25 ± 6 N·m (18 ± 4 lb ft)

Information System:

12H, 140H and 160H Motor Graders Hydraulic and Steering System Snow Plow/Bulldozer Relief Valve
120H Motor Grader Hydraulic and Steering System Drawbar
120H and 135H Motor Graders Hydraulic and Steering System Drawbar
D9R Track-Type Tractor Adjustable Ripper
D9R Track-Type Tractor Ripping
12H, 140H and 160H Motor Graders Hydraulic and Steering System Blade Lift Control Valve
12H, 140H and 160H Motor Graders Hydraulic and Steering System Valve and Linkage Group
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Seat Belt Adjustment
834B and 836 Landfill Compactor Power Guard Control
834B and 836 Landfill Compactor Caterpillar Reference Material
834B and 836 Landfill Compactor Refill Capacities
561M Pipelayer Track Roller Frame Guides - Inspect
824G , 825G and 826G Landfill Compactor Mounting and Dismounting
834B and 836 Landfill Compactor Cooling System Water Temperature Regulator - Replace
416C, 426C, 428C, 436C and 438C Backhoe Loaders Bucket Tips - Inspect/Replace
966G and 972G Wheel Loaders Engine Air Filter Secondary Element - Replace
561M Pipelayer Torque Converter
561M Pipelayer Engine Starting with Jump Start Cables
322B, 322B L, 325B and 325B L Excavators Fire Prevention and Explosion Prevention
928G Wheel Loader Crushing Prevention and Cutting Prevention
924Gz Wheel Loader General Hazard Information
IT62G Integrated Toolcarrier and 950G and 962G Wheel Loaders Battery Disconnect Switch
966G and 972G Wheel Loaders Engine Start Switch
416C, 426C, 428C, 436C and 438C Backhoe Loaders Seat Belt