12H, 140H and 160H Motor Graders Hydraulic and Steering System Snow Plow/Bulldozer Relief Valve Caterpillar


Snow Plow/Bulldozer Relief Valve
`



Illustration 1g00008172

(1) Torque for nut with 3/8-40 thread on retainer assembly ... 12 ± 2 N·m (106 ± 18 lb in)

(2) Retainer assembly

Note: Hold retainer assembly (2) when you are tightening nut (1).




Illustration 2g00008174

(3) Torque for nut with 9/16-18 thread on retainer assembly ... 20 ± 2 N·m (15 ± 1.5 lb ft)

Note: Hold retainer assembly (8) when you are tightening nut (3) .

(4) Use 2A-3211 Washer, as required:

Outside diameter ... 12.3 mm (.48 inch)
Inside diameter ... 5.5 mm (.22 inch)
Thickness of washer ... 0.8 mm (.032 inch)

(5) 2J-6089 Spring :

Test length ... 36.25 mm (1.427 inch)
Test force ... 278 ± 14 N (63 ± 3 lb)
Free length after test ... 44.12 ± 0.50 mm (1.737 ± .020 inch)
Outside diameter ... 12.5 mm (.49 inch)

Assemble valve (7) to relief valve body (6) at assembly. To install the valve manually into the seat of the relief valve body, use the spring (5) to guide the valve into the seat. To drive the valve manually, use a bolt that is the same diameter as the valve stem.

When you install the relief valve, lubricate seals with a thin covering of lubricant that is being sealed.

For proper relief valve pressure setting, the temperature of the oil should be 49 ± 3°C (120 ± 37°F).

Relief valve pressure setting ... 31000 ± 700 kPa (4500 ± 102 psi)

Oil flow ... 2.0 ± 0.2 L/min (.53 ± .05 US gpm)

Information System:

120H Motor Grader Hydraulic and Steering System Drawbar
120H and 135H Motor Graders Hydraulic and Steering System Drawbar
D9R Track-Type Tractor Adjustable Ripper
D9R Track-Type Tractor Ripping
12H, 140H and 160H Motor Graders Hydraulic and Steering System Blade Lift Control Valve
12H, 140H and 160H Motor Graders Hydraulic and Steering System Valve and Linkage Group
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Seat Belt Adjustment
834B and 836 Landfill Compactor Power Guard Control
834B and 836 Landfill Compactor Caterpillar Reference Material
834B and 836 Landfill Compactor Refill Capacities
561M Pipelayer Track Roller Frame Guides - Inspect
834B and 836 Landfill Compactor Throttle Lock Control
12H, 140H, 143H, 160H and 163H Motor Graders Hydraulic and Steering System Control Valve (Snow Plow/Dozer Lift)
824G , 825G and 826G Landfill Compactor Mounting and Dismounting
834B and 836 Landfill Compactor Cooling System Water Temperature Regulator - Replace
416C, 426C, 428C, 436C and 438C Backhoe Loaders Bucket Tips - Inspect/Replace
966G and 972G Wheel Loaders Engine Air Filter Secondary Element - Replace
561M Pipelayer Torque Converter
561M Pipelayer Engine Starting with Jump Start Cables
322B, 322B L, 325B and 325B L Excavators Fire Prevention and Explosion Prevention
928G Wheel Loader Crushing Prevention and Cutting Prevention
924Gz Wheel Loader General Hazard Information
IT62G Integrated Toolcarrier and 950G and 962G Wheel Loaders Battery Disconnect Switch
966G and 972G Wheel Loaders Engine Start Switch