12H, 140H and 160H Motor Graders Hydraulic and Steering System Blade Lift Control Valve Caterpillar


Blade Lift Control Valve
`



Illustration 1g00008291

(1) Torque for two plugs ... 80 ± 15 N·m (60 ± 11 lb ft)

(2) Lubricate seals with a thin covering of the lubricant that is being sealed.

(3) 102-7412 Spring

Test length ... 28 mm (1.1 inch)
Test force ... 46.0 ± 2.4 N (10.00 ± .54 lb)
Free length after test ... 48.42 mm (1.906 inch)
Outside diameter ... 18.2 mm (.72 inch)

(4) Torque for blade lift relief valve ... 35 ± 7 N·m (26 ± 5 lb ft)

Note: Before you install valves (5) and seats (6) into the control valve body, assemble the valves and seats together.

(7) Torque for plug ... 35 ± 7 N·m (26 ± 5 lb ft)

(8) 6E-5153 Spring

Test length ... 14.0 mm (.55 inch)
Test force ... 18.0 ± 1.4 N (4.00 ± .32 lb)
Free length after test ... 18.4 mm (.72 inch)
Outside diameter ... 7.2 mm (.28 inch)

(9) Lubricate seals with a thin covering of the lubricant that is being sealed.

(10) 9J-0403 Spring

Quantity ... 2
Test length ... 18.7 mm (.74 inch)
Test force ... 12.9 ± 1.0 N (2.90 ± .23 lb)
Free length after test ... 25.1 mm (.99 inch)
Outside diameter ... 10.4 mm (.41 inch)

(11) 111-8233 Spring

Test length ... 15.5 mm (.61 inch)
Test force ... 13.5 ± 0.8 N (3.03 ± .18 lb)
Free length after test ... 25.6 mm (1.01 inch)
Outside diameter ... 15.0 mm (.59 inch)

Gently seat the ball (12) into the valve body at assembly.

(13) 6E-3007 Spring

Test length ... 8.6 mm (.34 inch)
Test force ... 0.234 ± 0.024 N (.053 ± .005 lb)
Free length after test ... 10.0 mm (.39 inch)
Outside diameter ... 4.6 mm (.18 inch)

(14) Torque for lever ... 25 ± 6 N·m (18 ± 4 lb ft)




Illustration 2g00008293

View A

(15) Lubricate seals with a thin covering of the lubricant that is being sealed.

(16) Lubricate rings with a thin covering of the lubricant that is being sealed.

Information System:

12H, 140H and 160H Motor Graders Hydraulic and Steering System Valve and Linkage Group
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Seat Belt Adjustment
834B and 836 Landfill Compactor Power Guard Control
834B and 836 Landfill Compactor Caterpillar Reference Material
834B and 836 Landfill Compactor Refill Capacities
561M Pipelayer Track Roller Frame Guides - Inspect
834B and 836 Landfill Compactor Throttle Lock Control
834B and 836 Landfill Compactor Starting with Auxiliary Start Receptacle
844 Wheel Dozer Tree or Brush Removal
D9R Track-Type Tractor Standard Torque for Worm Drive Band Hose Clamps
D6R Track-Type Tractor Operation
834B and 836 Landfill Compactor After Starting Engine
D9R Track-Type Tractor Ripping
D9R Track-Type Tractor Adjustable Ripper
120H and 135H Motor Graders Hydraulic and Steering System Drawbar
120H Motor Grader Hydraulic and Steering System Drawbar
12H, 140H and 160H Motor Graders Hydraulic and Steering System Snow Plow/Bulldozer Relief Valve
12H, 140H, 143H, 160H and 163H Motor Graders Hydraulic and Steering System Control Valve (Snow Plow/Dozer Lift)
824G , 825G and 826G Landfill Compactor Mounting and Dismounting
834B and 836 Landfill Compactor Cooling System Water Temperature Regulator - Replace
416C, 426C, 428C, 436C and 438C Backhoe Loaders Bucket Tips - Inspect/Replace
966G and 972G Wheel Loaders Engine Air Filter Secondary Element - Replace
561M Pipelayer Torque Converter
561M Pipelayer Engine Starting with Jump Start Cables