14H and 16H Motor Grader Hydraulic and Steering System Linkage and Valve Group Caterpillar


Linkage and Valve Group
`
14H and 16H Motor Grader Hydraulic and Steering System [SENR8566]
HYDRAULIC SYSTEM
VALVE & LINKAGE GP
14H and 16H Motor Graders Hydraulic and Steering System Valve and Linkage Group
14H and 16H Motor Grader Hydraulic and Steering System Linkage and Valve Group
50515063124-4197 124-4220


Illustration 1g00009225

View From Front Of Machine

(1) As required, use the shims to provide a minimum amount of end play that allows the levers to return to the NEUTRAL position.

Thickness of 8D-5637 Shim ... 0.76 mm (.030 inch)

Thickness of 8D-5636 Shim ... 0.25 mm (.010 inch)

(A) Right Valve Group:

  • (2) Implement control valve for blade lift

  • (3) Implement control valve for wheel lean

  • (4) Implement control valve for centershift

  • (5) Implement control valve for articulation

(B) Left Valve Group:

  • (6) Implement control valve for blade tip

  • (7) Implement control valve for circle drive

  • (8) Implement control valve for sideshift

  • (2) Implement control valve for blade lift

  • (9) Implement control valve for ripper

(10) Install a spacer under the clip.

Note: Some of the motor graders may have different implements. The number of control valves in each valve group may vary.




Illustration 2g00007731

View A-A

(10) Torque for four bolts ... 60 ± 12 N·m (44 ± 9 lb ft)




Illustration 3g00007733

View B-B

(11) Torque for two bolts ... 60 ± 12 N·m (44 ± 9 lb ft)

Information System:

14H and 16H Motor Graders Hydraulic and Steering System Circle Drive
14H and 16H Motor Graders Hydraulic and Steering System Drawbar
14H and 16H Motor Grader Hydraulic and Steering System Drawbar
14H and 16H Motor Grader Hydraulic and Steering System Front Axle
14H and 16H Motor Grader Hydraulic and Steering System Front Axle
120H and 135H Motor Graders Hydraulic and Steering System Control Valve (Centershift)
120H and 135H Motor Graders Hydraulic and Steering System Control Valve (Ripper)
120H and 135H Motor Graders Hydraulic and Steering System Control Valve (Ripper)
14H and 16H Motor Graders Hydraulic and Steering System Control Valve (Blade Lift)
14H and 16H Motor Grader Hydraulic and Steering System Wheel Lean Control Valve
120H and 135H Motor Graders Hydraulic and Steering System Control Valve (Sideshift)
120H and 135H Motor Graders Hydraulic and Steering System Control Valve (Articulation)
14H and 16H Motor Grader Hydraulic and Steering System Blade Lift Control Valve
12H, 140H, 143H, 160H and 163H Motor Graders Hydraulic and Steering System Piston Pump (Hydraulic and Steering)
143H and 163H Motor Graders Hydraulic and Steering System Operator Console
12H, 140H, 143H, 160H and 163H Motor Graders Hydraulic and Steering System Front Axle
834B and 836 Landfill Compactor Safety Signs and Labels
515 Wheel Skidder and 525 Wheel Skidder General Hazard Information
14H and 16H Motor Grader Hydraulic and Steering System Circle Drive Group
12H, 140H, 143H, 160H and 163H Motor Graders Hydraulic and Steering System Circle Drive - Slip Clutch
14H and 16H Motor Grader Hydraulic and Steering System Circle Drive With Slip Clutch Group
834B and 836 Landfill Compactor Model View Illustrations
834B and 836 Landfill Compactor Product Identification Number, Serial Number and EU's CE Plate Locations
834B and 836 Landfill Compactor Electronic Monitoring System (EMS)