14H and 16H Motor Grader Hydraulic and Steering System Front Axle Caterpillar


Front Axle
`
14H and 16H Motor Grader Hydraulic and Steering System [SENR8566]
FRAME AND BODY
AXLE GP
14H and 16H Motor Grader Hydraulic and Steering System Front Axle
14H and 16H Motor Grader Hydraulic and Steering System Front Axle



Illustration 1g00814446

Rear View

(A) ... 2.0 ± 0.5 mm (0.08 ± 0.02 inch)

(1) Wheel lean cylinder

(2) Torque for two nuts ... 220 ± 14 N·m (160 ± 10 lb ft)

Note: As needed, tighten nuts (2) more in order to align the cotter slot.

(3) Torque for two nuts ... 220 ± 14 N·m (160 ± 10 lb ft)

Note: As needed, tighten nuts (3) more in order to align the cotter slot.

(4) Steering cylinders

(5) Torque for six bolts ... 130 ± 7 N·m (100 ± 5 lb ft)

(6) Torque for two bolts ... 700 ± 27 N·m (520 ± 20 lb ft)

(7) Thickness of 2G-3867 Shim ... 0.13 mm (0.005 inch)

Note: As needed, use shims (7) in order to achieve proper rolling torque.

(8) Rolling torque for spindle ... 13.5 ± 6.5 N·m (120 ± 60 lb in)




Illustration 2g00814447

Top View

(B) Minimum value (both sides) ... 0.8 mm (0.03 inch)

(C) Maximum dimension ... 2.0 mm (0.08 inch)

(9) Lean bar

(10) Torque for two nuts ... 550 ± 65 N·m (400 ± 50 lb ft)

(11) Torque for two nuts ... 75 ± 7 N·m (55 ± 5 lb ft)

(12) Tie Rod

(13) Thickness of 2G-5672 Washer ... 1.6 mm (0.06 inch)

Note: As needed, use washers in order to achieve a maximum gap for Dimension (C).

Information System:

120H and 135H Motor Graders Hydraulic and Steering System Control Valve (Centershift)
120H and 135H Motor Graders Hydraulic and Steering System Control Valve (Ripper)
120H and 135H Motor Graders Hydraulic and Steering System Control Valve (Ripper)
14H and 16H Motor Graders Hydraulic and Steering System Control Valve (Blade Lift)
14H and 16H Motor Grader Hydraulic and Steering System Wheel Lean Control Valve
120H and 135H Motor Graders Hydraulic and Steering System Control Valve (Sideshift)
120H and 135H Motor Graders Hydraulic and Steering System Control Valve (Articulation)
14H and 16H Motor Graders Hydraulic and Steering System Control Valve (Blade Tip)
14H and 16H Motor Graders Hydraulic and Steering System Valve and Linkage Group
120H and 135H Motor Graders Hydraulic and Steering System Control Valve (Scarifier)
143H and 163H Motor Graders Hydraulic and Steering System Ripper Relief Valve
120H and 135H Motor Graders Hydraulic and Steering System Relief Valve (Steering)
14H and 16H Motor Grader Hydraulic and Steering System Front Axle
14H and 16H Motor Grader Hydraulic and Steering System Drawbar
14H and 16H Motor Graders Hydraulic and Steering System Drawbar
14H and 16H Motor Graders Hydraulic and Steering System Circle Drive
14H and 16H Motor Grader Hydraulic and Steering System Linkage and Valve Group
14H and 16H Motor Grader Hydraulic and Steering System Blade Lift Control Valve
12H, 140H, 143H, 160H and 163H Motor Graders Hydraulic and Steering System Piston Pump (Hydraulic and Steering)
143H and 163H Motor Graders Hydraulic and Steering System Operator Console
12H, 140H, 143H, 160H and 163H Motor Graders Hydraulic and Steering System Front Axle
834B and 836 Landfill Compactor Safety Signs and Labels
515 Wheel Skidder and 525 Wheel Skidder General Hazard Information
14H and 16H Motor Grader Hydraulic and Steering System Circle Drive Group