Correct Usage of the Oil Rail Plug for the Cylinder Head on C9 Engines{1100} Caterpillar


`
Correct Usage of the Oil Rail Plug for the Cylinder Head on C9 Engines{1100} [TIBU5149]
BASIC ENGINE
CYLINDER HEAD GP
Correct Usage of the Oil Rail Plug for the Cylinder Head on C9 Engines{1100}
1.1. Introduction
2.1. Problem
3.1. Solution
Landfill Compactor:
816F Series 2 (S/N: BZR1-UP)
Soil Compactor:
815F Series 2 (S/N: BYN1-UP)
Engine:
C-9 (S/N: CLJ1-UP)
C9 (S/N: MTB1-UP; SRB1-UP; 9DG1-UP; X3R1-UP)
Generator Set:
C9 GEN SET (S/N: C9E1-UP)
C9 MARINE GS (S/N: C9A1-UP)
C9 MARINE GEN (S/N: SJB1-UP)
Industrial Engine:
C9 INDUSTRIAL (S/N: JSC1-UP; MBD1-UP; JLW1-UP)
Marine Engine:
C9 MARINE (S/N: C9B1-UP; CSN1-UP; X9X1-UP; Z9X1-UP)
Petroleum Engine:
C9 PETROLEUM (S/N: P9L1-UP)
Truck Engines:
C9 ON-HIGHWAY (S/N: ETK1-UP)
Excavator:
330C (S/N: CYA1-UP; MCA1-UP; JAB1-UP; D3C1-UP; JCD1-UP; KDD1-UP; GAG1-UP; RBH1-UP; B1K1-UP; JNK1-UP; B2L1-UP; BTM1-UP; B3M1-UP; MKM1-UP; B4N1-UP; CAP1-UP; GKX1-UP; DKY1-UP; CGZ1-UP)
330D (S/N: RDA1-UP; KAB1-UP; NBD1-UP; GGE1-UP; B6H1-UP; EAH1-UP; THJ1-UP; C5K1-UP; E4K1-UP; FFK1-UP; H3K1-UP; L2K1-UP; PCK1-UP; PEL1-UP; LEM1-UP; LRM1-UP; ERN1-UP; JLP1-UP; MWP1-UP; LDR1-UP; HAS1-UP; RAS1-UP; MEY1-UP; T2Y1-UP)
Track Feller Buncher:
511 (S/N: 5111-UP)
521 (S/N: 5211-UP)
522 (S/N: 5221-UP)
541 (S/N: 5411-UP)
551 (S/N: 5511-UP)
552 (S/N: 5521-UP)
TK711 (S/N: 1011-UP)
TK721 (S/N: 1021-UP)
TK722 (S/N: 1031-UP)
TK732 (S/N: 1041-UP)
Motor Grader:
12H (S/N: CBK1-UP; AMZ1-UP; 1251-UP)
Mobile Hydraulic Power Unit:
330C MHPU (S/N: MSD1-UP; MSL1-UP)
330D MHPU (S/N: D3D1-UP; H3D1-UP)
Transmission:
TH31-E61 (S/N: SKY1-UP)
Track-Type Loader:
973C (S/N: BCP1-UP; LDX1-UP)
Track-Type Tractor:
D6R Series II (S/N: BNC1-UP; AFD1-UP; CAD1-UP; ADE1-UP; BLE1-UP; BRE1-UP; DAE1-UP; ACJ1-UP; BMJ1-UP; BRJ1-UP; BMK1-UP; BNL1-UP; AEM1-UP; AFM1-UP; AGM1-UP; BPM1-UP; AEP1-UP; BPP1-UP; BPS1-UP; BLT1-UP; FDT1-UP; AAX1-UP; BMY1-UP; BPZ1-UP; BRZ1-UP)
D6R Series III (S/N: GJB1-UP; WCB1-UP; HDC1-UP; RFC1-UP; TBC1-UP; HCD1-UP; HKE1-UP; WRG1-UP; MTJ1-UP; DMK1-UP; JEK1-UP; EXL1-UP; JDL1-UP; DLM1-UP; LFM1-UP; LGP1-UP; DPS1-UP; GMT1-UP; MRT1-UP)
Wheel Tractor-Scraper:
627G (S/N: CEZ1-UP)
637G (S/N: DEY1-UP)
Wheel Dozer:
814F Series 2 (S/N: BXG1-UP)

Introduction

The problem that is identified below does not have a known permanent solution. Until a permanent solution is known, use the solution that is identified below.

Problem

A change to the casting was made to the various cylinder head groups on the C9 engine. The change was made in order to address cracking of the cylinder head along the oil rail. The oil rail supplies high pressure oil to the injectors. A new plug for the end of the rail was introduced. the new part number is 271-7442 Plug . There was not a change in the part number for the new cylinder heads. Some of the Parts Identification manuals are incorrect.

Solution

The new 271-7442 Plug can not be installed on the older versions of the cylinder head. The new plug will not seal the oil rail on the older cylinder heads. If either of the plug assemblies should need to be replaced, ensure that the correct plug assembly is ordered. The plug determines whether the engine has the older head or the newer head. The older cylinder head has the 183-3902 Plug As that has a 3/4 inch socket head. The new cylinder head has the 271-7442 Plug which has a one inch hex head.




Illustration 1g01411840

(1) 271-7442 Plug




Illustration 2g01411848

(2) 183-3902 Plug As

Information System:

Transportation Information {7000}
IT38H Integrated Toolcarrier and 938H Wheel Loader Braking and Hydraulic Fan System Service Brake System Pressure - Test
The Proper Procedures for Troubleshooting Mechanical Unit Injectors (MUI){1251, 1264, 1280, 1288, 1290}
140M and 150 Motor Graders Engine Supplement Rear Chassis Support - Install
140M and 150 Motor Grader Cab - Install
140M and 150 Motor Grader Cab - Remove
2007/09/10 A New Lip Seal Is Now Used {3256, 3258, 3278, 7555}
140M and 150 Motor Graders Engine Supplement Rear Chassis Support - Remove
2007/12/03 The Exhaust Pipe Groups are Updated {1061}
140M and 150 Motor Grader Piston Pump (All Wheel Drive) - Install
938H Wheel Loader and IT38H Integrated Toolcarrier Hydraulic System Relief Valve (Line) - Test and Adjust
3500 Generator Sets Fuel System Secondary Filter - Replace
160M and 160 Motor Grader Power Train Front Axle - Remove
160M and 160 Motor Grader Machine Systems Fuel Tank - Remove
2007/09/24 The Body Exhaust Arrangement is Updated {1061, 1062}
Arctic Conversion for the Engine in a 587R{1355, 1380}
938H Wheel Loader and IT38H Integrated Toolcarrier Hydraulic System Kickout and Positioner - Adjust
160M and 160 Motor Grader Machine Systems Front Frame to Rear Frame (Articulating Hitch) - Connect
160M and 160 Motor Grader Machine Systems Front Frame from Rear Frame (Articulating Hitch) - Separate
PM-201 Cold Planer C18 Engine Supplement Muffler - Remove and Install
PM-201 Cold Planer C18 Engine Supplement Air Cleaner - Remove and Install
PM-201 Cold Planer C18 Engine Supplement Alternator - Remove and Install
PM-201 Cold Planer C18 Engine Supplement Battery - Remove and Install
PM-201 Cold Planer C18 Engine Supplement Battery and Battery Cable - Separate and Connect