PRODUCT IMPROVEMENT PROGRAM INSPECTING AND POSSIBLY REWORKING CERTAIN 20R6551 C15 REMAN ENGINES IN DEALER PART STOCK Caterpillar


`
PRODUCT IMPROVEMENT PROGRAM INSPECTING AND POSSIBLY REWORKING CERTAIN 20R6551 C15 REMAN ENGINES IN DEALER PART STOCK [UEBE1441]
SERVICE EQUIPMENT AND SUPPLIES
PARTS STOCK, ORDERING & RETURN
PRODUCT IMPROVEMENT PROGRAM INSPECTING AND POSSIBLY REWORKING CERTAIN 20R6551 C15 REMAN ENGINES IN DEALER PART STOCK
UEBE1441-00

09Nov2020


U-650
A-536
D-612
O-603

 

Parts stock action only

  
  

PRODUCT IMPROVEMENT PROGRAM INSPECTING AND POSSIBLY REWORKING CERTAIN 20R6551 C15 REMAN ENGINES IN DEALER PART STOCK

7750
PI70850
NOTE:

AVSpare’s obligations under this Service Letter are subject to, and shall not apply in contravention of, the laws, rules, regulations, directives, ordinances, orders, or statutes of the United States, or of any other applicable jurisdiction, without recourse or liability with respect to AVSpare.

NOTE:

When submitting claim for Parts Stock Action, Use the appropriate 99Z as the s/n, the appropriate Service Letter Program Number as the Part number in the Part Causing Failure field, "7751" as the Group Number, "56" as the Description Code.

NOTE:

The information supplied in this service letter may not be valid after the termination date of this program. Do not perform the work outlined in this Service Letter after the termination date without first contacting your AVSpare product analyst.


TERMINATION DATE

28Feb2021

PROBLEM

Certain 20R6551 C15 Reman Engines were built using a 1555619 gasket between the block and flywheel housing. This can lead to oil leaks.

ACTION REQUIRED

Inspect all 20R6551 Reman Engines in dealer parts stock for a visible gasket between the engine block and flywheel housing.

If a 20R6551 Reman Engine has a 1555619 gasket visible between the engine block and flywheel (Image 1), refer to M0099946 for removal and installation of flywheel housing. Remove the 1555619 gasket and replace with quantity as needed Loctite 5188 or alternate Loctite 5127 flexible anaerobic flange sealant. Install a new 3190785 Crankshaft Seal.

If a 20R6551 Reman Engine does not have a 1555619 gasket visible between the engine block and flywheel housing mark as inspected per this program and return to dealer part stock.
Image1

SERVICE CLAIM ALLOWANCES

Submit one claim for all engines reworked in dealer parts stock. Include the serial numbers of the engines reworked in dealer parts stock. If the visible gasket is present 4 hours will be allowed to remove the gasket and install the sealant for each engine reworked in dealer parts stock. One 3190785 Crankshaft Seal is allowed and quantity as needed is allowed for Loctite for each engine reworked in dealer parts stock.

PARTS DISPOSITION

Handle the parts in accordance with your Warranty Bulletin on warranty parts handling.
 

Information System:

PRODUCT SUPPORT PROGRAM FOR REPLACE THE TRANSMISSION ON CERTAIN 140 GC MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING PRODUCT LINK PL121, PL321, PL542 SATELITE RADIOS ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 590-3612 CENTER FRAME ON ONE PL72 PIPELAYER
PRODUCT SUPPORT PROGRAM FOR INSTALLING THE POWER MODULE 400 ON CERTAIN 140, 150, 160 MOTOR GRADERS
PRODUCT IMPROVEMENT PROGRAM FOR CONFIRMING PROPER TORQUE OF DIFFERENTIAL PIN BOLTS ON CERTAIN 785D AND 789D OFF-HIGHWAY TRUCKS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REMOVING CERTAIN 498-1922 FILTER BYPASS SWITCHES FROM DEALER PARTS STOCK
PRODUCT SUPPORT PROGRAM FOR REPLACING THE EXHAUST ROCKER ARM ON CERTAIN 773G OFF-HIGHWAY TRUCKS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE WASTEGATE VALVE ACTUATOR ON CERTAIN 797F OFF-HIGHWAY TRUCKS WITH HIGH ALTITUDE ARRANGEMENT ENGINES
PRODUCT SUPPORT PROGRAM FOR REWORKING THE RIDE CONTROL SYSTEM ON CERTAIN PM620 AND PM820 COLD PLANERS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REMOVING ADDITIONAL 521-0747 IMU CABLE ASSEMBLIES FROM DEALER PART STOCK
PRODUCT SUPPORT PROGRAM FOR INSPECTING AND REPLACING BOLTS FOR THE ROLLER FRAME FRONT AXLE TUBE ASSEMBLY ON CERTAIN 239D3 AND 249D3 COMPACT TRACK LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE OIL COOLER HOSE ON CERTAIN 770G AND 772G OFF-HIGHWAY TRUCKS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING THE 5117975 FUEL PUMP ON CERTAIN C9.3 REMAN 20R4509, 20R5307, 20R6190, AND 20R6192 LONG BLOCKS, 20R7002, AND 20R7003 REMAN ENGINES IN DEALER PARTS STOCK
PRODUCT SUPPORT PROGRAM FOR REWORKING THE MH BOOM ASSEMBLY ON CERTAIN M324D WHEELED EXCAVATORS AND MH3022/MH3024/MH3026 MATERIAL HANDLERS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING THE ENGINE BLOCK FOR COOLANT LEAKS ON CERTAIN 415, 416, 420, 428, 430, 432, 434, AND 444 BACKHOE LOADERS, 910, 914, AND 920 COMPACT WHEEL LOADERS, D1, D2, AND D3 TRACK-TYPE TRACTORS, 313, 315, AND 317 EXCAVA
PRODUCT SUPPORT PROGRAM FOR BRAKE SYSTEM IMPROVEMENTS ON CERTAIN 793F OFF-HIGHWAY TRUCKS
Installation Of 3Y6693 Regulator Used With 3Y6880 Conversion Kit{1400}
Reusable Parts Test{0374}
Test All Graphic Types{0374}
120H Motor Grader Hydraulic and Steering System Piston Pump (Hydraulic and Steering)
120H and 135H Motor Graders Hydraulic and Steering System Metering Pump (Steering)
12H, 140H, 143H, 160H and 163H Motor Graders Hydraulic and Steering System Operator Console
120H and 135H Motor Graders Hydraulic and Steering System Control Valve (Blade Lift)
14H and 16H Motor Graders Hydraulic and Steering System Metering Pump (Steering)