PRODUCT SUPPORT PROGRAM FOR INSPECTING AND REWORKING THE TRACTION CONTROL WIRING ON CERTAIN R1700 LOAD HAUL DUMP MACHINES
[UEBE1334]
ELECTRICAL AND STARTING SYSTEM
WIRING GP
PRODUCT SUPPORT PROGRAM FOR INSPECTING AND REWORKING THE TRACTION CONTROL WIRING ON CERTAIN R1700 LOAD HAUL DUMP MACHINES
UEBE1334-00
Show/hide table
| 05Oct2020 |
U-585
A-482
D-553
O-542
Show/hide table
| Before/After | PRODUCT SUPPORT PROGRAM FOR INSPECTING AND REWORKING THE TRACTION CONTROL WIRING ON CERTAIN R1700 LOAD HAUL DUMP MACHINES |
|
| 4801 1408 | PS46878 |
|
Show/hide table
| NOTE: | AVSpare’s obligations under this Service Letter are subject to, and shall not apply in contravention of, the laws, rules, regulations, directives, ordinances, orders, or statutes of the United States, or of any other applicable jurisdiction, without recourse or liability with respect to AVSpare. |
| NOTE: | This Program must be administered either before or after failure. In either case the decision whether to apply the Program is made by the dealer. When reporting the repair, use "PS46878" as the Part Number and "7755" as the Group Number. If administered before failure, use "56" as the Warranty Claim Description Code and "T" as the SIMS Description code. If administered after failure, use "96" as the Warranty Claim Description Code, and "Z" as the SIMS Description Code. |
Show/hide table
| NOTE: | The information supplied in this service letter may not be valid after the termination date of this program. Do not perform the work outlined in this Service Letter after the termination date without first contacting your AVSpare product analyst. |
Show/hide table
Show/hide table
Show/hide table
Show/hide table
TERMINATION DATE |
| 31Oct2022 |
PROBLEM
Show/hide table
| The existing Traction Control Wiring can be connected incorrectly and the traction control system may apply braking to the wrong wheel on certain R1700 Load Haul Dump Machines. |
AFFECTED PRODUCT
Show/hide table
| Model | Identification Number |
| R1700K | KT400125-00204 |
PARTS NEEDED
Show/hide table
| No parts needed for this program |
ACTION REQUIRED
Show/hide table
| Refer to Service Magazine M0123341 on how to check the traction control wiring and ensure the brake control harness plugs are connected in the correct sequence. |
Show/hide table
SERVICE CLAIM ALLOWANCES
Show/hide table
0-36 mo |
||||||
Show/hide table
| NOTE: This is a 1.0-hour job | ||||||
Show/hide table
PARTS DISPOSITION
Show/hide table
| Handle the parts in accordance with your Warranty Bulletin on warranty parts handling. |
Information System:
PRODUCT SUPPORT PROGRAM FOR REPLACING THE ENGINE OIL SCAVENGE PUMP BOLTS ON CERTAIN 797F OFF-HIGHWAY TRUCKS
PRODUCT SUPPORT PROGRAM FOR REMOVING THE RETARDER LEVER ON CERTAIN 745 ARTICULATED TRUCKS
PRODUCT IMPROVEMENT PROGRAM FOR REWORKING CERTAIN 230-1070 ENGINE OIL PANS IN DEALER PART STOCK
PRODUCT SUPPORT PROGRAM FOR REWORKING THE SHIMS AND BOLTS OF THE HITCH GP ON CERTAIN 140 GC MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REMOVING THE RETARDER LEVER ON CERTAIN 745 AND 745C ARTICULATED TRUCKS
PRODUCT IMPROVEMENT PROGRAM FOR PERFORMING NEW CALIBRATIONS ON CERTAIN 740 AND 745 ARTICULATED TRUCKS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE TURBINE INLET SENSOR ON CERTAIN 794 AC OFF-HIGHWAY TRUCKS EQUIPPED WITH HIGH ALTITUDE AIR SYSTEMS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE DEF PUMP ON CERTAIN CATERPILLAR PRODUCTS EQUIPPED WITH A C7.1 ENGINE
PRODUCT SUPPORT PROGRAM FOR REPLACING TRANSMISSION SOFTWARE ON CERTAIN MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING ENGINE BLOCKS AT PLANNED COMPONENT REBUILD (PCR) ON CERTAIN 797 AND 797B OFF-HIGHWAY TRUCKS
PRODUCT SUPPORT PROGRAM FOR REPLACING WHEEL BEARINGS USING AN IMPROVED PRELOAD PROCEDURE ON CERTAIN 12M 3, 120M 2, 140M 3, AND 160M 3 MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE NRS COOLER ON ON CERTAIN 336F, 340F AND 352F EXCAVATORS, 725, 730 AND 735 ARTICULATED TRUCKS, 772G OFF-HIGHWAY TRUCKS, 826K LANDFILL COMPACTORS, 966, 972 AND 980 WHEEL LOADERS, D6T TRACK-TYPE TRACTORS, AND P
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 521-6254 ENGINE HARNESS ASSEMBLY ON CERTAIN 797F OFF-HIGHWAY TRUCKS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE FAN BELT TIGHTENER BEARINGS ON CERTAIN 785G OFF-HIGHWAY TRUCKS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE FLUSHING LOOP HOSE ON CERTAIN AP655F, AP600F, AP555F, AND AP500F ASPHALT PAVERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 470-1594 AIR INTAKE BELLOWS ON CERTAIN 797F OFF-HIGHWAY TRUCKS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING CERTAIN LIFTER COVER ASSEMBLIES ON CERTAIN 797F OFF-HIGHWAY TRUCKS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE OIL COOLER HOSE ON CERTAIN 770G AND 772G OFF-HIGHWAY TRUCKS
PRODUCT SUPPORT PROGRAM FOR INSPECTING AND REPLACING BOLTS FOR THE ROLLER FRAME FRONT AXLE TUBE ASSEMBLY ON CERTAIN 239D3 AND 249D3 COMPACT TRACK LOADERS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REMOVING ADDITIONAL 521-0747 IMU CABLE ASSEMBLIES FROM DEALER PART STOCK
PRODUCT SUPPORT PROGRAM FOR REWORKING THE RIDE CONTROL SYSTEM ON CERTAIN PM620 AND PM820 COLD PLANERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE WASTEGATE VALVE ACTUATOR ON CERTAIN 797F OFF-HIGHWAY TRUCKS WITH HIGH ALTITUDE ARRANGEMENT ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE EXHAUST ROCKER ARM ON CERTAIN 773G OFF-HIGHWAY TRUCKS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REMOVING CERTAIN 498-1922 FILTER BYPASS SWITCHES FROM DEALER PARTS STOCK