PRODUCT SUPPORT PROGRAM FOR REMOVING THE RETARDER LEVER ON CERTAIN 745 ARTICULATED TRUCKS Caterpillar


`
PRODUCT SUPPORT PROGRAM FOR REMOVING THE RETARDER LEVER ON CERTAIN 745 ARTICULATED TRUCKS [UEBE1321]
ELECTRICAL AND STARTING SYSTEM
WIRING GP
PRODUCT SUPPORT PROGRAM FOR REMOVING THE RETARDER LEVER ON CERTAIN 745 ARTICULATED TRUCKS
UEBE1321-00

08Oct2020


V27E

 
Containment -
Before/After

 (Limited distribution) 
  

PRODUCT SUPPORT PROGRAM FOR REMOVING THE RETARDER LEVER ON CERTAIN 745 ARTICULATED TRUCKS

1408 4343
PS91129
NOTE:

AVSpare’s obligations under this Service Letter are subject to, and shall not apply in contravention of, the laws, rules, regulations, directives, ordinances, orders, or statutes of the United States, or of any other applicable jurisdiction, without recourse or liability with respect to AVSpare.

NOTE:

This Containment Program can be administered either before or after a failure occurs. In either case the decision whether to apply the Program is made by the dealer and service rep. Obtain the service reps Goodwill Approver Code before completing the repair. EAME dealers should use their standard Industry Group specific goodwill approval codes. The Goodwill Approver Code must be included when submitting the claim.

NOTE:

When reporting the repair, use "PS91129" as the Part Number and "7777" as the Group Number. If administered before failure, use "56" as Warranty Claim Description and "T" as the SIMS Description Code. If administered after failure, use "96" as Warranty Claim Description Code and use "Z" as the SIMS Description Code.

NOTE:

The information supplied in this service letter may not be valid after the termination date of this program. Do not perform the work outlined in this Service Letter after the termination date without first contacting your AVSpare product analyst.


TERMINATION DATE

31Oct2021

PROBLEM

The existing retarder lever, if not used correctly, can affect the transmission durability on certain 745 Articulated Trucks.

AFFECTED PRODUCT

Model Identification Number
745  3F601526-01527, 1529, 1532-1533

PARTS NEEDED

Qty

Part Number Description
2 1912276 SCREW-TRUSS HEAD
1 5464568 PLUG
1 HARNESS DEALER FABRIAVSED
In order to allow equitable parts availability to all participating dealers, please limit your initial parts order to not exceed 32% of dealership population. This is an initial order recommendation only, and the ultimate responsibility for ordering the total number of parts needed to satisfy the program lies with the dealer.


ACTION REQUIRED

Refer to the Service Manual if/as necessary.

Remove the Retarder Lever from the steering column, as described in Service Magazine, M0114141, "Retarder Lever is Now Removed from the Steering Column on Certain 700 Series Articulated Trucks".

SERVICE CLAIM ALLOWANCES

Product smu/age whichever comes first
AVSpare
Dealer Suggested
Customer Suggested
Parts %
Labor Hrs%
Parts %
Labor Hrs%
Parts %
Labor Hrs%
0-3000 hrs,
0-12 mo 
100.0%
100.0%
0.0%
0.0%
0.0%
0.0%
 NOTE: This is a 1.0-hour job



PARTS DISPOSITION

Handle the parts in accordance with your Warranty Bulletin on warranty parts handling.
 
 
 

Information System:

PRODUCT IMPROVEMENT PROGRAM FOR REWORKING CERTAIN 230-1070 ENGINE OIL PANS IN DEALER PART STOCK
PRODUCT SUPPORT PROGRAM FOR REWORKING THE SHIMS AND BOLTS OF THE HITCH GP ON CERTAIN 140 GC MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REMOVING THE RETARDER LEVER ON CERTAIN 745 AND 745C ARTICULATED TRUCKS
PRODUCT IMPROVEMENT PROGRAM FOR PERFORMING NEW CALIBRATIONS ON CERTAIN 740 AND 745 ARTICULATED TRUCKS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE TURBINE INLET SENSOR ON CERTAIN 794 AC OFF-HIGHWAY TRUCKS EQUIPPED WITH HIGH ALTITUDE AIR SYSTEMS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE DEF PUMP ON CERTAIN CATERPILLAR PRODUCTS EQUIPPED WITH A C7.1 ENGINE
PRODUCT SUPPORT PROGRAM FOR REPLACING TRANSMISSION SOFTWARE ON CERTAIN MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING ENGINE BLOCKS AT PLANNED COMPONENT REBUILD (PCR) ON CERTAIN 797 AND 797B OFF-HIGHWAY TRUCKS
PRODUCT SUPPORT PROGRAM FOR REPLACING WHEEL BEARINGS USING AN IMPROVED PRELOAD PROCEDURE ON CERTAIN 12M 3, 120M 2, 140M 3, AND 160M 3 MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE NRS COOLER ON ON CERTAIN 336F, 340F AND 352F EXCAVATORS, 725, 730 AND 735 ARTICULATED TRUCKS, 772G OFF-HIGHWAY TRUCKS, 826K LANDFILL COMPACTORS, 966, 972 AND 980 WHEEL LOADERS, D6T TRACK-TYPE TRACTORS, AND P
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN 217-4193 AND 217-4195 COOLANT HOSES FROM DEALER PARTS STOCK
PRODUCT SUPPORT PROGRAM FOR INSPECTING AND INSTALLING RADIO BRACKET FOR CAB PANEL ASSEMBLY ON CERTAIN 794 AC, 796 AC, AND 798 AC OFF-HIGHWAY TRUCKS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE ENGINE OIL SCAVENGE PUMP BOLTS ON CERTAIN 797F OFF-HIGHWAY TRUCKS
PRODUCT SUPPORT PROGRAM FOR INSPECTING AND REWORKING THE TRACTION CONTROL WIRING ON CERTAIN R1700 LOAD HAUL DUMP MACHINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 521-6254 ENGINE HARNESS ASSEMBLY ON CERTAIN 797F OFF-HIGHWAY TRUCKS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE FAN BELT TIGHTENER BEARINGS ON CERTAIN 785G OFF-HIGHWAY TRUCKS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE FLUSHING LOOP HOSE ON CERTAIN AP655F, AP600F, AP555F, AND AP500F ASPHALT PAVERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 470-1594 AIR INTAKE BELLOWS ON CERTAIN 797F OFF-HIGHWAY TRUCKS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING CERTAIN LIFTER COVER ASSEMBLIES ON CERTAIN 797F OFF-HIGHWAY TRUCKS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE OIL COOLER HOSE ON CERTAIN 770G AND 772G OFF-HIGHWAY TRUCKS
PRODUCT SUPPORT PROGRAM FOR INSPECTING AND REPLACING BOLTS FOR THE ROLLER FRAME FRONT AXLE TUBE ASSEMBLY ON CERTAIN 239D3 AND 249D3 COMPACT TRACK LOADERS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REMOVING ADDITIONAL 521-0747 IMU CABLE ASSEMBLIES FROM DEALER PART STOCK
PRODUCT SUPPORT PROGRAM FOR REWORKING THE RIDE CONTROL SYSTEM ON CERTAIN PM620 AND PM820 COLD PLANERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE WASTEGATE VALVE ACTUATOR ON CERTAIN 797F OFF-HIGHWAY TRUCKS WITH HIGH ALTITUDE ARRANGEMENT ENGINES