120H and 135H Motor Graders Seat Belt Caterpillar


Seat Belt
`
120H and 135H Motor Graders [SEBU7474]
OPERATOR STATION
SEAT GP
120H and 135H Motor Graders Seat
120H and 135H Motor Graders Seat Belt
1.1. Seat Belt Adjustment for Non-Retractable Seat Belts
2.2. Lengthening the Seat Belt
3.2. Shortening the Seat Belt
4.2. Fastening The Seat Belt
5.2. Releasing The Seat Belt
6.1. Seat Belt Adjustment for Retractable Seat Belts
7.2. Fastening The Seat Belt
8.2. Releasing The Seat Belt
9.1. Extension of the Seat Belt

Note: This machine was equipped with a seat belt when the machine was shipped from AVSpare. At the time of installation, the seat belt and the instructions for installation of the seat belt meet the SAE J386 and ISO 6683 standards. Consult your Cat dealer for all replacement parts.

Always check the condition of the seat belt and the condition of the mounting hardware before you operate the machine.

Seat Belt Adjustment for Non-Retractable Seat Belts

Adjust both ends of the seat belt. The seat belt should be snug but comfortable.

Lengthening the Seat Belt



Illustration 1g00100709

  1. Unfasten the seat belt.


    Illustration 2g00932817

  2. To remove the slack in outer loop (1), rotate buckle (2). This will free the lock bar. This permits the seat belt to move through the buckle.

  3. Remove the slack from the outer belt loop by pulling on the buckle.

  4. Loosen the other half of the seat belt in the same manner. If the seat belt does not fit snugly with the buckle in the center, readjust the seat belt.

Shortening the Seat Belt



Illustration 3g00100713

  1. Fasten the seat belt. Pull out on the outer belt loop in order to tighten the seat belt.

  2. Adjust the other half of the seat belt in the same manner.

  3. If the seat belt does not fit snugly with the buckle in the center, readjust the seat belt.

Fastening The Seat Belt



Illustration 4g00932818

Fasten the seat belt catch (3) into the buckle (2). Make sure that the seat belt is placed low across the lap of the operator.

Releasing The Seat Belt



Illustration 5g00100717

Pull up on the release lever. This will release the seat belt.

Seat Belt Adjustment for Retractable Seat Belts

Fastening The Seat Belt



Illustration 6g00867598

Pull seat belt (4) out of the retractor in a continuous motion.

Fasten seat belt catch (3) into buckle (2). Make sure that the seat belt is placed low across the lap of the operator.

The retractor will adjust the belt length and the retractor will lock in place. The comfort ride sleeve will allow the operator to have limited movement.

Releasing The Seat Belt



Illustration 7g00039113

Push the release button on the buckle in order to release the seat belt. The seat belt will automatically retract into the retractor.

Extension of the Seat Belt

------ WARNING! ------

When using retractable seat belts, do not use seat belt extensions, or personal injury or death can result.

The retractor system may or may not lock up depending on the length of the extension and the size of the person. If the retractor does not lock up, the seat belt will not retain the person.


Longer, non-retractable seat belts and extensions for the non-retractable seat belts are available.

AVSpare requires only non-retractable seat belts to be used with a seat belt extension.

Consult your Cat dealer for longer seat belts and for information on extending the seat belts.

Information System:

CS-563E, CP-563E, CS-573E, CP-573E, CS-583E, CP-583E, CS-663E, CP-663E and CS-683E Vibratory Soil Compactors Drum Scrapers - Inspect/Adjust/Replace
AP-1000D, AP-1055D, AP-655C, BG-2255C, BG-2455D and BG-260D Asphalt Pavers MID 039 - CID 0168 - FMI 04
AP-1000D, AP-1055D, AP-655C, BG-2255C, BG-2455D and BG-260D Asphalt Pavers MID 039 - CID 0168 - FMI 03
574B Forwarder Power Train Hydrostatic Drive System
AP-655C and BG-2255C Asphalt Pavers Propel System Piston Pump Neutral - Test and Adjust
3524B Engine for Caterpillar Built Machines Crankshaft Rear Seal and Wear Sleeve - Remove
797 Off-Highway Truck Power Train Transmission
RM-350B Road Reclaimer/Soil Stabilizer Machine Systems Rotor Drive Differential - Assemble
R2900 Load Haul Dump Machine Operation Information
3512 and 3516 EUI Engines for 784B, 785B, 789B and 793B Off-Highway Trucks Air Filter Restriction Lamp
3524B Engine for Caterpillar Built Machines Engine Oil Sequence Valves - Remove and Install
CP-563E, CP-573E, CS-563E, CS-573E and CS-583E Vibratory Soil Compactors Vibratory System Features
2002/11/18 Replacement Mobil-Trac System Belts Are Now Available for John Deere 8000T Series Agricultural Tractors {4198}
R2900 Load Haul Dump Stopping the Engine
CB-534D, CB-534D XW and CB-564D Paving Compactors Machine Systems Metering Pump (Steering)
14H Motor Grader Machine Systems Fuel Tank (Left Side) - Remove
14H Motor Grader Machine Systems Fuel Tank (Left Side) - Install
R2900 Load Haul Dump Lift Arm Positioner
CB-534D, CB-534D XW and CB-564D Vibratory Asphalt Compactors Vibratory System Piston Pump (Vibratory)
CB-534D, CB-534D XW and CB-564D Vibratory Asphalt Compactors Vibratory System Vibratory Valve
CB-534D, CB-534D XW and CB-564D Vibratory Asphalt Compactors Vibratory System Piston Motor (Vibratory)
CB-534D, CB-534D XW and CB-564D Vibratory Asphalt Compactors Vibratory System Eccentric Weight
R2900 Load Haul Dump Lubricant Viscosities
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Braking System Accumulator Charging Valve (Brake) - Test and Adjust