CS-563E, CP-563E, CS-573E, CP-573E, CS-583E, CP-583E, CS-663E, CP-663E and CS-683E Vibratory Soil Compactors Drum Scrapers - Inspect/Adjust/Replace Caterpillar


Drum Scrapers - Inspect/Adjust/Replace
`
CS-563E, CP-563E, CS-573E, CP-573E, CS-583E, CP-583E, CS-663E, CP-663E and CS-683E Vibratory Soil Compactors [KEBU7513]
FRAME AND BODY
SCRAPER GP
CS-563E, CP-563E, CS-573E, CP-573E, CS-583E, CP-583E, CS-663E, CP-663E and CS-683E Vibratory Soil Compactors Drum Scrapers - Inspect/Adjust/Replace
1.1. Smooth Drum Scrapers (If Equipped)
2.2. Steel Scrapers
3.2. Adjust
4.2. Flexible Scrapers
5.2. Adjust
6.2. Replace the Flexible Scrapers
7.1. Padded Drum Scraper Assembly (If Equipped)
8.2. Adjust

Smooth Drum Scrapers (If Equipped)

Steel Scrapers

There is one scraper that is located on the front bumper. There is an optional steel scraper for the rear of the drum.

Adjust

Loosen the two bolts.

Adjust the steel scraper to 20 mm (0.79 inch) from the drum surface.

Flexible Scrapers



Illustration 1g00930431

Adjust

  1. Inspect flexible scraper (3). Clean the flexible scraper of dirt and debris.

  2. Loosen bolts (4) that are holding the rear flexible scraper blade and the backing plate to the bracket.

  3. Loosen nuts (1) that hold the front flexible scraper blade and the backing plate to the bracket.

    Note: When you adjust flexible scraper (3), the steel backing plate (2) must not come into contact with the surface of the drum.

  4. Adjust flexible scraper blades (3) to 7 mm (0.25 inch) away from the surface of the drum. Backing plate (2) must be set back 35 mm (1.375 inch) from the end of the scraper. Adjust flexible scraper blade (3) and backing plate (2) together.

  5. Tighten the nuts.

Replace the Flexible Scrapers

  1. Replace the flexible scrapers if excessive wear or damage is evident.

  2. Loosen the bolts and nuts (1) that are holding flexible scraper blades (3).

  3. Remove the flexible scraper blades (3). Install the new flexible scraper blades.

    Note: When you adjust flexible scraper blade (3), the steel backing plate (2) must not come into contact with the surface of the drum.

  4. Adjust the flexible scraper blades (3) to 7 mm (0.25 inch) away from the surface of the drum. The backing plate (2) must be set back 35 mm (1.375 inch) from the end of the scraper. Adjust the flexible scraper blades (3) and the backing plate together.

  5. Tighten the bolts and tighten the nuts.

Padded Drum Scraper Assembly (If Equipped)

Adjust



Illustration 2g00936962

There is one scraper that is located in front of the drum. There is a scraper that is located at the rear of the drum.

  1. Inspect the scraper. Clean the dirt and the debris from the scraper.

  2. There are two bolts (2) for each scraper (1). Each scraper is individually adjustable.

  3. Slide the scraper (1) toward the drum. Adjust the tips so the tips are 25 mm (1 inch) from the surface of the drum.

  4. Tighten the bolts.

    Bolts (2) ... 542 N·m (400 lb ft)

Information System:

AP-1000D, AP-1055D, AP-655C, BG-2255C, BG-2455D and BG-260D Asphalt Pavers MID 039 - CID 0168 - FMI 04
AP-1000D, AP-1055D, AP-655C, BG-2255C, BG-2455D and BG-260D Asphalt Pavers MID 039 - CID 0168 - FMI 03
574B Forwarder Power Train Hydrostatic Drive System
AP-655C and BG-2255C Asphalt Pavers Propel System Piston Pump Neutral - Test and Adjust
3524B Engine for Caterpillar Built Machines Crankshaft Rear Seal and Wear Sleeve - Remove
797 Off-Highway Truck Power Train Transmission
RM-350B Road Reclaimer/Soil Stabilizer Machine Systems Rotor Drive Differential - Assemble
R2900 Load Haul Dump Machine Operation Information
3512 and 3516 EUI Engines for 784B, 785B, 789B and 793B Off-Highway Trucks Air Filter Restriction Lamp
3524B Engine for Caterpillar Built Machines Engine Oil Sequence Valves - Remove and Install
CP-563E, CP-573E, CS-563E, CS-573E and CS-583E Vibratory Soil Compactors Vibratory System Features
R2900 Load Haul Dump Transmission Control
120H and 135H Motor Graders Seat Belt
2002/11/18 Replacement Mobil-Trac System Belts Are Now Available for John Deere 8000T Series Agricultural Tractors {4198}
R2900 Load Haul Dump Stopping the Engine
CB-534D, CB-534D XW and CB-564D Paving Compactors Machine Systems Metering Pump (Steering)
14H Motor Grader Machine Systems Fuel Tank (Left Side) - Remove
14H Motor Grader Machine Systems Fuel Tank (Left Side) - Install
R2900 Load Haul Dump Lift Arm Positioner
CB-534D, CB-534D XW and CB-564D Vibratory Asphalt Compactors Vibratory System Piston Pump (Vibratory)
CB-534D, CB-534D XW and CB-564D Vibratory Asphalt Compactors Vibratory System Vibratory Valve
CB-534D, CB-534D XW and CB-564D Vibratory Asphalt Compactors Vibratory System Piston Motor (Vibratory)
CB-534D, CB-534D XW and CB-564D Vibratory Asphalt Compactors Vibratory System Eccentric Weight
R2900 Load Haul Dump Lubricant Viscosities