D5N Track-Type Tractor Seat Caterpillar


Seat
`
1.1. Mechanical Suspension
2.1. Air Suspension (If Equipped)

Note: The operator's seat that is provided with this machine is in compliance with the appropriate class of ISO 7096.

Adjust the seat in order to allow full travel of the pedals. Make the seat adjustments when the operator is sitting against the back of the seat.



Illustration 1g00928918

Mechanical Suspension

Pull up on the backrest in order to remove extension (1).

Backrest Cushion Angle (2) - Pull the lever upward. Hold the lever upward and adjust the backrest cushion to the desired angle. Release the lever in order to lock the backrest cushion into position.

Fore and Aft Position (3) - Pull the lever upward. Hold the lever upward and slide the seat forward or backward to the desired position. Release the lever in order to lock the seat into position.

Lumbar Support (4) - Rotate the knob clockwise in order to increase support to the lower back. Rotate the knob counterclockwise in order to decrease support to the lower back. Release the knob in order to set the seat backrest into position.

Seat Cushion Angle (5) - Rotate the knob clockwise in order to increase the front angle of the seat cushion. Move the seat cushion to the desired angle. Rotate the knob counterclockwise in order to decrease the front angle of the seat cushion. Release the knob in order to set the seat cushion into position.

Seat Height (6) - Pull the lever upward. Hold the lever upward and move the seat to the desired height. Release the lever in order to lock the seat into position.

Air Suspension (If Equipped)

The suspension control system is designed to automatically adjust the seat height to one of three positions: LOW, MID and HIGH. The suspension control system will then maintain that position within a preset range during the machine operation.

The seat suspension will automatically adjust the seat height to the selected position.

Fore and Aft Position (3) - Pull the lever upward. Hold the lever upward and slide the seat forward or backward to the desired position. Release the lever in order to lock the seat into position.

Backrest Cushion Angle (2) - Pull the lever upward. Hold the lever upward and adjust the backrest cushion to the desired angle. Release the lever in order to set the backrest cushion into position.

Seat Height (7) - Pull the knob outward. Raise the seat to the desired position and release the knob.

Information System:

938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Braking System Accumulator Charging Valve (Brake)
IT38G Series II Integrated Toolcarrier and 938G Series II Wheel Loader Hydraulic System
R2900 Load Haul Dump Service Inspection
AP-1000D, AP-1055D, AP-655C, BG-2255C, BG-2455D and BG-260D Asphalt Pavers MID 030 - CID 0248 - FMI 02
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Braking System Vane Pump (Braking)
3524B Engine for Caterpillar Built Machines Flywheel - Remove and Install
3054E Industrial Engine Fuel System Pressure - Test
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Braking System General Information (Braking)
3516B and 3516C Engines for Off-Highway Trucks Lubrication System
14H Motor Grader Machine Systems Gerotor Motor (Circle Drive) - Remove
Product Link 151/201 Reports and Messages Not Available
Product Link 151/201 Electronic Service Tool Does Not Communicate with ECM
TK711, TK721, TK722 and TK732 Track Feller Bunchers Hydraulic System Machine Preparation for Troubleshooting
14H Motor Grader Machine Systems Centershift Lock - Remove
14H Motor Grader Machine Systems Centershift Lock - Install
AP-1000D, AP-1055D, AP-655C, BG-2255C, BG-2455D and BG-260D Asphalt Pavers MID 030 - CID 0263 - FMI 03
AP-1000D, AP-1055D, AP-655C, BG-2255C, BG-2455D and BG-260D Asphalt Pavers MID 030 - CID 0263 - FMI 04
R2900 Load Haul Dump Autoshift Control (STIC Steering)
R2900 Load Haul Dump Autoshift Control (Wheel Steering)
AP-1000D, AP-1055D, AP-655C, BG-2255C, BG-2455D and BG-260D Asphalt Pavers MID 030 - CID 0271 - FMI 05
AP-1000D, AP-1055D, AP-655C, BG-2255C, BG-2455D and BG-260D Asphalt Pavers MID 030 - CID 0271 - FMI 06
574B Forwarder Power Train Braking System
AP-1000D, AP-1055D, AP-655C, BG-2255C, BG-2455D and BG-260D Asphalt Pavers MID 030 - CID 0324 - FMI 05
AP-1000D, AP-1055D, AP-655C, BG-2255C, BG-2455D and BG-260D Asphalt Pavers MID 030 - CID 0324 - FMI 06