R2900 Load Haul Dump Lift Arm and Cylinder Bearings - Lubricate Caterpillar


Lift Arm and Cylinder Bearings - Lubricate
`


NOTICE

Check that the lines attached to all the remote grease fittings are undamaged. If the grease lines are split, grease will not reach the components that require lubricating. Machine damage will result.


Wipe off the fittings before any lubricant is applied.




    Illustration 1g00947399

  1. Apply lubricant through one fitting (1) on each side of the machine for the rear lift arm bearing (2 points).



    Illustration 2g00947401

  1. Apply lubricant through remote mounted fitting (2) for the bearing at the head end of the right lift cylinder.

  1. Apply lubricant through remote mounted fitting (3) for the bearing at the head end of the left lift cylinder.

  1. Apply lubricant through remote mounted fitting (4) for the bearing at the rod end of the left lift cylinder.

  1. Apply lubricant through remote mounted fitting (5) for the bearing at the rod end of the right lift cylinder.

Information System:

14H Motor Grader Machine Systems Blade - Install
CP-563E, CP-573E, CS-563E, CS-573E and CS-583E Vibratory Soil Compactors Vibratory System Bypass Valve (Return Manifold)
120H and 135H Motor Graders Machine Systems Swivel - Assemble
120H and 135H Motor Graders Machine Systems Swivel - Disassemble
D350E and D400E Articulated Trucks Power Train Front Axle
CP-563E, CP-573E, CS-563E, CS-573E and CS-583E Vibratory Soil Compactors Vibratory System Piston Pump (Vibratory System)
CP-563E, CP-573E, CS-563E, CS-573E and CS-583E Vibratory Soil Compactors Vibratory System Piston Motor (Vibratory System)
14H Motor Grader Machine Systems Swivel - Install
CP-563E, CP-573E, CS-563E, CS-573E and CS-583E Vibratory Soil Compactors Vibratory System Support and Vibratory Drive
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Hydraulic System Gear Motor (Hydraulic Fan)
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Hydraulic System Ride Control System
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Hydraulic System Relief Valve (Line)
Product Link 151/201 Electronic Control Module (ECM)
Product Link 151/201 System Components
Product Link 151/201 Spare Inputs
322C Forest Machine Hydraulic System Fan Motor Speed (Hydraulic Oil Cooler) - Test and Adjust
Product Link 151/201 General Information
533 and 543 Wheel Feller Bunchers Machine Systems Solenoid Valve and Manifold (Disc Saw) - Remove and Install
533 and 543 Wheel Feller Bunchers Machine Systems Combination Valve (Pilot, Brake, and Steering) - Remove
533 and 543 Wheel Feller Bunchers Machine Systems Combination Valve (Pilot, Brake, and Steering) - Install
R2900 Load Haul Dump Radiator Core - Clean
AP-1000D, AP-1055D, AP-655C, BG-2255C, BG-2455D and BG-260D Asphalt Pavers MID 039 - CID 0151 - FMI 03
AP-1000D, AP-1055D, AP-655C, BG-2255C, BG-2455D and BG-260D Asphalt Pavers MID 039 - CID 0151 - FMI 05
AP-1000D, AP-1055D, AP-655C, BG-2255C, BG-2455D and BG-260D Asphalt Pavers MID 039 - CID 0151 - FMI 06