R2900 Load Haul Dump Implement and Steering Lockout (STIC Steering) - Test Caterpillar


Implement and Steering Lockout (STIC Steering) - Test
`
1.1. Steering Primary Lockout
2.1. Implement and Steering Secondary Lockout

Be sure the area around the machine is clear of personnel and obstructions.

Be sure the steering frame lock is in the stored position.

Fasten the seat belt before testing the steering and implement lockout systems.

Steering Primary Lockout

  1. Start the engine and raise the bucket slightly.

  1. Depress the service brake pedal to apply the service brakes. Disengage the parking brake.



    Illustration 1g00945832

  1. With steering and transmission lock lever (1) in the LOCKED position (as shown), attempt to steer the machine in a left or right direction. The machine should not move.

  1. Move transmission direction control (2) to either the FORWARD or REVERSE position. The transmission should not engage.

  1. Engage the parking brake. Lower the bucket to the ground and stop the engine.


NOTICE

If the machine moved while testing the steering primary lockout system, contact your AVSpare dealer. Have the dealer inspect and repair the steering primary lockout before returning the machine to operation.


Implement and Steering Secondary Lockout

  1. Start the engine and raise the bucket slightly.

  1. Depress the service brake pedal to apply the service brakes. Disengage the parking brake.

  1. Move the steering and transmission lock lever to the UNLOCKED position.

    ------ WARNING! ------

    Personal injury or death from crushing can result if the machine turns towards the operator's station door (left turn) with the door open.

    Keep clear of the operator's station door and check the implement and steering lockout operation using a right turn only.

    ----------------------

  1. Open the operator's station door approximately 200 mm (7.9 inch) and attempt to steer the machine in a right turn direction only. The machine should not move.

  1. Move the joystick control lever to all lever positions. The bucket should not move.

  1. Close the operator's station door.

  1. Engage the parking brake. Lower the bucket to the ground and stop the engine.


NOTICE

If the bucket or the machine moved while testing the implement and steering secondary lockout system, contact your AVSpare dealer. Have the dealer inspect and repair the implement and steering secondary lockout before returning the machine to operation.


Information System:

AP-1000D, AP-1055D, AP-655C, BG-2255C, BG-2455D and BG-260D Asphalt Pavers Diagnostic Code List
3176C and 3196 Engines for Caterpillar Built Machines Replacing the ECM
CP-563E, CP-573E, CS-563E, CS-573E and CS-583E Vibratory Soil Compactors Machine Systems Gear Motor (Fan Drive)
CP-563E, CP-573E, CS-563E, CS-573E and CS-583E Vibratory Soil Compactors Machine Systems Metering Pump (Steering)
CP-563E, CP-573E, CS-563E, CS-573E and CS-583E Vibratory Soil Compactors Propel System Piston Motor (Drum Propel)
3512 and 3516 EUI Engines for 784B, 785B, 789B and 793B Off-Highway Trucks Diagnostic Codes
CP-563E, CP-573E, CS-563E, CS-573E and CS-583E Vibratory Soil Compactors Machine Systems Gear Pump (Steering)
AP-1000D, AP-1055D, AP-655C, BG-2255C, BG-2455D and BG-260D Asphalt Pavers MID 039 - CID 1738 - FMI 06
AP-1000D, AP-1055D, AP-655C, BG-2255C, BG-2455D and BG-260D Asphalt Pavers MID 039 - CID 1738 - FMI 05
AP-1000D, AP-1055D, AP-655C, BG-2255C, BG-2455D and BG-260D Asphalt Pavers MID 039 - CID 1738 - FMI 03
AP-1000D, AP-1055D, AP-655C, BG-2255C, BG-2455D and BG-260D Asphalt Pavers MID 039 - CID 1737 - FMI 06
AP-1000D, AP-1055D, AP-655C, BG-2255C, BG-2455D and BG-260D Asphalt Pavers MID 039 - CID 1737 - FMI 05
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Hydraulic System Electrical Output Components
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Hydraulic System Piston and Vane Pump (Implement Section)
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Hydraulic System Pilot Valve
14H Motor Grader Machine Systems Swivel - Remove
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Hydraulic System Relief Valve (Main)
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Hydraulic System Relief Valve (Line)
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Hydraulic System Ride Control System
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Hydraulic System Gear Motor (Hydraulic Fan)
CP-563E, CP-573E, CS-563E, CS-573E and CS-583E Vibratory Soil Compactors Vibratory System Support and Vibratory Drive
14H Motor Grader Machine Systems Swivel - Install
CP-563E, CP-573E, CS-563E, CS-573E and CS-583E Vibratory Soil Compactors Vibratory System Piston Motor (Vibratory System)
CP-563E, CP-573E, CS-563E, CS-573E and CS-583E Vibratory Soil Compactors Vibratory System Piston Pump (Vibratory System)