PR-750B PAVEMENT PROFILER Service Data Caterpillar

Service Data
1.1. Capacities (Approximate)
2.1. Fuels
3.1. Lubricants And Oils
4.1. Engine Cooling System Antifreeze

Capacities (Approximate)

Engine Crankcase (Refill Capacity) ... 16 U.S. Gallons(60.5 L) with filter change ... 17 U.S. Gallons(64.3 L)

Engine Cooling System (Engine Only) ... 15 U.S. Gallons(57 L)

Fuel Tank ... 325 U.S. Gallons(1230 L)

Water Tank ... 1200 U.S. Gallons(4541 L)

Cutter Drum (50% Solution of Water and Ethylene Glycol Antifreeze) ... 100 U.S. Gallons(378 L)

Main Hydraulic Oil Tank ... 46 U.S. Gallons(174 L)

Hydraulic Oil Replenishing Tank ... 12 U.S. Gallons(45 L)

Air Line Lubricator ... 1/2 U.S. Pint(240 cc)

Cutter Planetary Gear Reducer ... 4 U.S. Gallons(15 L)

Track Planetary Gear Reducer ... 5.6 U.S. Quarts(5.3 L)

Pump Drive Gearbox ... 4.5 U.S. Quarts(4.3 L)

Engine P.T.O. ... 1 U.S. Quart(0.95 L)

Cutter Drive Sheaves (each sheave) ... 1 U.S. Quart(0.95 L)

Optional High Pressure Water System Pump ... 1 U.S. Quart(0.95 L)


No. 2 fuel oil or No. 2D diesel fuel with a minimum cetane rating of 40. In extremely cold temperatures use No. 1 fuel oil or No. 1D diesel fuel. A higher cetane rating is required for high altitude operation or cold weather starting.

Lubricants And Oils

BR - Multipurpose Grease (CMI No A05536)

1. Type: Multipurpose grease as defined by SAE J310a.
2. Consistency: NLGI No. 1.
3. Vendor: Mobilux EP-1, Mobil Grease MP, or equivalent.

LB - Leg Barrel Grease (CMI No. A03305)

1. Type: Molybdenum disulfide or graphite adhesive black grease.
2. Consistency: NLGI No. 2.
3. Vendor: 1956 Texclad 2, or equivalent.

GL - Gear Lubricant (CMI No. A35535)

1. Type: Axle and manual transmission lubricant meeting API designations GL-5 or GL-6 as defined in SAE J308a.
2. Viscosity: SAE 90 as defined in SAE J306a.
3. Vendor: Mobilgear 630, or equivalent.

HO - Hydraulic System Oil (CMI No. A05533) Automatic Transmission Fluid, Type F, meets Ford Motor Company Specification ESW-M2C33-F.

CO - Diesel Engine Crankcase Oil (CMI No. A05265)

1. Type: Engine oil meeting SAE designation CD or MIL-L-2104D.
2. Viscosity:

CC - Crankcase Oil

1. Type: Non-detergent automotive engine oil.
2. Viscosity: SAE 10W.

Engine Cooling System Antifreeze

Ethylene glycol type permanent antifreeze (CMI No. A05268). Recommended mixture - 50% antifreeze and 50% clean mineral-free water.