EPC Parts Catalogs

IT28G Integrated Toolcarrier Fuel System Primary Filter - Replace Caterpillar


  1. Home
  2. Operation and Maintenance Manual
  3. #55668
Fuel System Primary Filter - Replace
`
IT28G Integrated Toolcarrier [SEBU7020]
IT28G Integrated Toolcarrier Equipment Lowering with Engine Stopped
IT28G Integrated Toolcarrier Hydraulic System Oil - Change
FUEL SYSTEM
FILTER GP-FUEL
IT28G Integrated Toolcarrier Fuel System Primary Filter - Replace

Show/hide table
NOTICE

Do not fill fuel filters with fuel before installing them. Contaminated fuel will cause accelerated wear to fuel system parts.

Show/hide table

Illustration 1g00470121

The fuel filter is located in the engine compartment on the right side of the machine.

  1. Open the engine access door on the right side of the machine.
    Show/hide table

    Illustration 2g00101891

  1. Remove the fuel filter. Inspect the fuel filter for debris by cutting the filter open. Discard the filter properly.

  1. Clean the mounting base of the fuel filter. Remove any part of the old seal that remains on the mounting base of the fuel filter.

  1. Coat the seal of the new fuel filter with clean diesel fuel.

  1. Install the new fuel filter by hand. When the seal contacts the base, tighten the filter for an additional three quarters of a turn.

  1. Prime the fuel system. Refer to Operation and Maintenance Manual, "Fuel System - Prime" .

  1. Close the engine access door.

Information System:

IT28G Integrated Toolcarrier Equipment Lowering with Engine Stopped
IT28G Integrated Toolcarrier Engine Oil and Filter - Change
IT28G Integrated Toolcarrier Cooling System Coolant (DEAC) - Change
793C and 793C XQ Off-Highway Truck Power Train Oil Filter (Transmission Charging)
793C and 793C XQ Off-Highway Truck Power Train Gear Pump (Transmission and Torque Converter)
793C and 793C XQ Off-Highway Truck Air System and Brakes Gear Pump (Hoist and Front Brake Cooling)
3208 Marine Engine Engine Oil Sample - Obtain
IT28G Integrated Toolcarrier Engine Air Filter Secondary Element - Replace
3208 Marine Engine Hoses and Clamps - Inspect/Replace
793B Off-Highway Truck Air System and Brakes Temperature Sensor (Brake Oil)
3208 Marine Engine Fuel Tank Water and Sediment - Drain
928G Wheel Loader Alert Indicators
IT28G Integrated Toolcarrier Hydraulic System Oil - Change
IT28G Integrated Toolcarrier Hydraulic System Oil Filter - Replace
IT28G Integrated Toolcarrier Hydraulic System Oil Level - Check
IT28G Integrated Toolcarrier Lifting and Tying Down the Machine
IT28G Integrated Toolcarrier Model View Illustrations
IT28G Integrated Toolcarrier Product Identification Number, Serial Number and EU's CE Plate Locations
793B Off-Highway Truck Power Train Relief Valve (Torque Converter Inlet)
793B Off-Highway Truck Power Train Relief Valve (Torque Converter Outlet)
793B Off-Highway Truck Power Train Torque Converter
IT28G Integrated Toolcarrier Single Lever Control
C27 PET GEN SET Electric Power Generation and C27 KNOCKDOWN K Petroleum Power Train Package Overhaul Considerations
IT28G Integrated Toolcarrier Towing the Machine