Pressurized system: Hot coolant can cause serious burn. To open cap, stop engine, wait until radiator is cool. Then loosen cap slowly to relieve the pressure.
Remove the access panel (1) on the top of the engine compartment. Use the steps (2) and the handholds (3) that are located on the left side of the machine in order to reach the access panel.
- The radiator cap is located on the top of the radiator on the left side of the machine. Remove the radiator cap slowly in order to relieve pressure.
- Maintain the coolant level in the sight gauge when the cooling system is cool. If you need to add coolant daily, check the cooling system for leaks.
- Inspect the radiator cap seal. Replace the radiator cap seal if the radiator cap seal is damaged.
- Install the radiator cap.