IT28G Integrated Toolcarrier Bulldozing and Dumping Caterpillar


Bulldozing and Dumping
`
1.1. Bulldozing
2.1. Dumping

Bulldozing




Illustration 1g00468857

Keep the bottom of the bucket parallel to the ground when you are bulldozing.

Dumping




Illustration 2g00449321

To control dumping, move the tilt control lever to the DUMP position. Then, return the tilt control lever to the HOLD position. Repeat this procedure until the bucket is empty.

Dump the bucket when the wind is moving toward the front of the machine. This will help to keep dust away from the engine. This will also help to maintain visibility.

To achieve the maximum angle for dumping, use the bucket stops.


NOTICE

Striking the stops unnecessarily and repetitively can result in accelerated wear and high maintenance cost of the loader linkage.


Information System:

IT28G Integrated Toolcarrier Battery Electrolyte Level - Check
IT28G Integrated Toolcarrier Attachment Arm and Cylinder Linkage - Lubricate
IT28G Integrated Toolcarrier V-Belts - Inspect/Adjust/Replace
322B, 322B L, 325B and 325B L Excavators Boom, Stick and Bucket Operation
D6F SR, D6G and D6G SR Track-Type Tractors Operation
561M Pipelayer Seat Adjustment
322B, 322B L, 325B and 325B L Excavators Operating Technique Information
IT28G Integrated Toolcarrier Pallet Fork Rated Load
561M Pipelayer Cooling System Additive (DEAC) - Add
631E Series II Wheel Tractor-Scrapers Tire Inflation with Nitrogen
793B Off-Highway Truck Air System and Brakes Service and Parking Brake (Rear)
322B, 322B L, 325B and 325B L Excavators Operation
IT28G Integrated Toolcarrier Cooling System Coolant Additive (DEAC) - Add
IT28G Integrated Toolcarrier Cooling System Level - Check
793C and 793C XQ Off-Highway Truck Air System and Brakes Control Valve (Hoist)
572R Pipelayer General Hazard Information
793B Off-Highway Truck Power Train Lockup Clutch and Synchronizing Valve (Torque Converter)
928G Wheel Loader Alert Indicators
3208 Marine Engine Fuel Tank Water and Sediment - Drain
793B Off-Highway Truck Air System and Brakes Temperature Sensor (Brake Oil)
3208 Marine Engine Hoses and Clamps - Inspect/Replace
IT28G Integrated Toolcarrier Engine Air Filter Secondary Element - Replace
3208 Marine Engine Engine Oil Sample - Obtain
793C and 793C XQ Off-Highway Truck Air System and Brakes Gear Pump (Hoist and Front Brake Cooling)