IT62G Integrated Toolcarrier and 950G and 962G Wheel Loaders Radiator Core - Clean Caterpillar


Radiator Core - Clean
`
1.1. Low Sound Machines and Blue Angel Machines


    Illustration 1g00290860

  1. Open the engine hood. The radiator assembly is located at the rear of the machine.


    Illustration 2g00315688

  2. Remove two bolts (1). Swing hydraulic oil cooler (2) away from radiator (3).


    Illustration 3g00315690

  3. Remove two bolts (4). Swing air conditioner condenser (5) away from radiator (3).


    Illustration 4g00101939

  4. You can use compressed air, high pressure water, or steam to remove dust and other debris from the radiator fins. However, the use of compressed air is preferred.

  5. Swing the hydraulic oil cooler back into the operating position and replace the two bolts.

  6. Swing the air conditioner condenser back into the operating position and replace the two bolts.

  7. Close the engine hood.

Low Sound Machines and Blue Angel Machines



Illustration 5g00480311

  1. Push the button and open the radiator grill that is located on the rear of the machine.


    Illustration 6g00480313

  2. Remove bolt (1). Swing hydraulic oil cooler (2) away from the radiator.

  3. Remove two bolts (3). Swing air conditioner condenser (4) away from the radiator.


    Illustration 7g00101939

  4. You can use compressed air, high pressure water, or steam to remove dust and other debris from the radiator fins. However, the use of compressed air is preferred.

  5. Swing the hydraulic oil cooler back into the operating position and replace the bolt.

  6. Swing the air conditioner condenser back into the operating position and replace the two bolts.

  7. Close the radiator grill.

Information System:

416C, 426C, 428C, 436C and 438C Backhoe Loaders Cooling System Coolant Extender (ELC) - Add
416C, 426C, 428C, 436C and 438C Backhoe Loaders Cooling System Coolant (ELC) - Change
120H and 135H Motor Graders Hydraulic and Steering System Blade Lift Control Valve
924Gz Wheel Loader Braking System - Test
12H, 140H, 143H, 160H and 163H Motor Graders Hydraulic and Steering System Valve and Linkage Group
12H, 140H, 143H, 160H and 163H Motor Graders Hydraulic and Steering System Operator Console
561M Pipelayer Transmission - Power Shift
928G Wheel Loader Refill Capacities
IT62G Integrated Toolcarrier and 950G and 962G Wheel Loaders Engine Air Filter Secondary Element - Replace
793B Off-Highway Truck Steering System Relief Valve (Steering)
966G and 972G Wheel Loaders Secondary Steering - If Equipped
561M Pipelayer Transmission Selector and Pressure Control Valve - Power Shift
120H and 135H Motor Graders Hydraulic and Steering System Control Valve (Blade Lift)
561M Pipelayer Transmission Controls and Parking Brake Linkage
120H and 135H Motor Graders Power Train Clutch Control (Modulation)
12H, 140H, 143H, 160H and 163H Motor Graders Power Train Selector and Pressure Control Valve
120H and 135H Motor Graders Hydraulic and Steering System Control Valve (Snow Plow/Dozer Lift)
12H, 140H, 143H, 160H and 163H Motor Graders Power Train Selector and Pressure Control Valve
515 Wheel Skidder and 525 Wheel Skidder Machine Retrieval
IT62G Integrated Toolcarrier and 950G and 962G Wheel Loaders Fuel System - Prime
928G Wheel Loader Radiator Core - Clean
561M Pipelayer Cooling System Coolant (DEAC) - Change
561M Pipelayer Bevel and Transfer Gears - Power Shift
Installation of Output Yoke and Screen Housing On Remanufactured Transmissions{3002, 3159}