IT62G Integrated Toolcarrier and 950G and 962G Wheel Loaders Fuses - Replace Caterpillar


Fuses - Replace
`


NOTICE

Replace the fuses with the same type and size only. Otherwise, electrical damage can result.

If it is necessary to replace fuses frequently, an electrical problem exists. Contact your AVSpare dealer.


Fuses - The fuses protect the electrical system from a circuit that has been overloaded. Change a fuse if the element separates. If the element of a new fuse separates, check and repair the circuit.



Illustration 1g00990294

The fuse panel is located at the rear of the operator compartment.

Transmission Control (1) - 10 amp

Secondary Steering (2) (if equipped) - 10 amp

Turn Signals and Rotating Beacon (3) - 10 amp

Quick Coupler (4) (if equipped) - 10 amp

Window Wipers (5) - 10 amp

Payload Control System (6) - 10 amp

Electric Converter (7) - 10 amp

Digital Electrical Monitoring System (8) - 10 amp

Rear Floodlights (9) - 15 amp

Front Floodlights (10) - 15 amp

Lighter (11) - 10 amp

Axle Oil Cooler (12) (if equipped) - 10 amp

Hydraulic System (13) - 10 amp

Implements (14) - 10 amp



Illustration 2g00990364

Additional fuses are located in the engine compartment on the right side of the machine.

Backup Alarm (15) - 10 amp

Brake Lights (16) - 10 amp

Engine Start Switch (17) - 10 amp

Horn (18) - 10 amp

Information System:

IT62G Integrated Toolcarrier and 950G and 962G Wheel Loaders Specifications
928G Wheel Loader Secondary Steering
938G Wheel Loader and IT38G Integrated Toolcarrier Engine Starting with Auxiliary Start Receptacle - If Equipped
554 Forwarder and 574 Forwarder Engine Starting with Jump Start Cables
928G Wheel Loader Starting Below 0°C (32°F) with Thermal Starting Aid
928G Wheel Loader Starting Above 0°C (32°F)
966G and 972G Wheel Loaders Display Modules (Caterpillar Monitoring System)
928G Wheel Loader Seat
IT62G Series II Integrated Toolcarrier Mounting and Dismounting
924Gz Wheel Loader Heating and Air Conditioning Control
928G Wheel Loader Directional Turn Signal and Hazard Flasher Control
928G Wheel Loader Light Switches
120H and 135H Motor Graders Air System and Brakes Parking Brake
928G Wheel Loader Shipping the Machine
IT62G Integrated Toolcarrier and 950G and 962G Wheel Loaders Circuit Breakers - Reset
IT62G Integrated Toolcarrier and 950G and 962G Wheel Loaders Transmission Oil Filter - Replace
IT62G Integrated Toolcarrier and 950G and 962G Wheel Loaders Hydraulic System Oil Filter - Replace
793B Off-Highway Truck Steering System Steering Gear
966G and 972G Wheel Loaders Hydraulic System Oil - Change
793C and 793C XQ Off-Highway Truck Steering System Piston Pump (Steering)
793B Off-Highway Truck Steering System Steering Control Valve
IT62G Integrated Toolcarrier and 950G and 962G Wheel Loaders Engine Oil and Filter - Change
928G Wheel Loader Autoshift Control
12H, 140H, 143H, 160H and 163H Motor Graders Air System and Brakes Service Brakes