928G Wheel Loader Seat Caterpillar


Seat
`
1.1. Suspension Seat
2.2. Adjustable Armrest
3.2. Seat Adjustment
4.1. Contour Series Seat
5.2. Backrest
6.2. Adjustable Armrest
7.2. Seat Adjustment
8.1. Contour Series Air Seat
9.2. Backrest
10.2. Adjustable Armrest
11.2. Seat Adjustment
12.2. Heated Seat

The operator's seat that is provided with this machine is in compliance with the appropriate class of ISO 7096.

Note: Adjust the seat at the beginning of each work period and adjust the seat when you are changing operators.

The seat should be adjusted so that full pedal travel is allowed with an operator that is seated against the back of the seat.

Suspension Seat

Adjustable Armrest




Illustration 1g00102664

Rotate the knob in order to adjust the angle of the armrest. Make this adjustment when you are in the operating position.

Seat Adjustment




Illustration 2g00102665

Pull up on the back cushion angle lever (1). Hold the back cushion angle lever and adjust the back seat cushion to the desired angle. Release the back cushion angle lever to lock the back seat cushion.

Pull up on the fore/aft lever (2). Hold the fore/aft lever. Slide the seat forward to the desired position or slide the seat backward to the desired position. Release the fore/aft lever in order to lock the seat into position.

Turn knob (3) clockwise in order to increase the stiffness of the suspension. Turning the knob counterclockwise decreases the stiffness of the suspension. Set the weight to the approximate weight setting. Do not turn the knob past the maximum weight setting or past the minimum weight setting.




Illustration 3g00103893

Push the seat angle lever (4) and raise the front of the seat cushion to the desired angle. To lower the cushion into the desired position, push the seat angle lever and push down the front of the seat cushion. Release the lever in order to lock the seat cushion into one of three positions.

Contour Series Seat

Backrest




Illustration 4g00102519

Pull up backrest (1) in order to remove the backrest.

Adjustable Armrest

Rotate knob (2) in order to adjust the angle of the armrest. Make this adjustment when you are in the operating position.

Seat Adjustment




Illustration 5g00103474

Pull up the lever (3) for the back cushion angle. Hold up the lever and adjust the seat cushion to the desired angle. Release the lever in order to lock the seat cushion.

Pull up the fore/aft lever (4). Hold up the lever and slide the seat to the desired position. Release the lever in order to lock the seat into position.

Pull up the lever (5) for the angle of seat cushion and raise the front of the seat cushion to the desired angle. To lower the cushion into the desired position, pull up the lever and push down the front of the seat cushion. Release the lever in order to lock the seat cushion into one of three positions.

Turn the knob (6) clockwise in order to increase the stiffness of the suspension. Turn the knob counterclockwise in order to decrease the stiffness of the suspension. Use the indicator (7) to determine the approximate weight setting.

Hold down the seat height level lever (8) in order to release the seat height lock. Move the seat to the desired height. Release the lever in order to lock the seat into position.

Contour Series Air Seat

Backrest




Illustration 6g00102519

Pull up backrest (1) in order to remove the backrest.

Adjustable Armrest

Rotate knob (2) in order to adjust the angle of the armrest. Make this adjustment when you are in the operating position.

Seat Adjustment




Illustration 7g00102512

Pull up the lever (3) for the back cushion angle. Hold up the lever and adjust the seat cushion to the desired angle. Release the lever in order to lock the seat cushion.

Pull up the fore/aft lever (4). Hold up the lever and slide the seat to the desired position. Release the lever in order to lock the seat into position.

Pull up the lever (5) for the angle of seat cushion and raise the front of the seat cushion to the desired angle. To lower the cushion into the desired position, pull up the lever and push down the front of the seat cushion. Release the lever in order to lock the seat cushion into one of three positions.

Push in the knob (6) in order to increase the stiffness of the suspension. Pull the knob in order to decrease the stiffness of the suspension.

Note: The engine start switch key must be in the ON position in order to increase the stiffness of the seat.




Illustration 8g00102520

Turn the lumbar support lever (7) clockwise to a horizontal position in order to utilize the lumbar support. If lumbar support is not desired, turn the lumbar support lever counterclockwise to a vertical position.

Heated Seat

The heating element for the heated seat is controlled by a thermostat. The thermostat opens the circuit for the heating element at 26.5° ± 5°C (79.7° ± 9°F). The thermostat closes the circuit for the heating element when the temperature drops below 15°C (59°F).

Information System:

IT62G Series II Integrated Toolcarrier Mounting and Dismounting
924Gz Wheel Loader Heating and Air Conditioning Control
928G Wheel Loader Directional Turn Signal and Hazard Flasher Control
928G Wheel Loader Light Switches
928G Wheel Loader Gauges
928G Wheel Loader Service Brake Control
928G Wheel Loader Thermal Starting Aid
924Gz Wheel Loader Engine Start Switch
416C, 426C, 428C, 436C and 438C Backhoe Loaders Fire Prevention and Explosion Prevention
416C, 426C, 428C, 436C and 438C Backhoe Loaders Seat Belt
966G and 972G Wheel Loaders Engine Start Switch
IT62G Integrated Toolcarrier and 950G and 962G Wheel Loaders Battery Disconnect Switch
966G and 972G Wheel Loaders Display Modules (Caterpillar Monitoring System)
928G Wheel Loader Starting Above 0°C (32°F)
928G Wheel Loader Starting Below 0°C (32°F) with Thermal Starting Aid
554 Forwarder and 574 Forwarder Engine Starting with Jump Start Cables
938G Wheel Loader and IT38G Integrated Toolcarrier Engine Starting with Auxiliary Start Receptacle - If Equipped
928G Wheel Loader Secondary Steering
IT62G Integrated Toolcarrier and 950G and 962G Wheel Loaders Specifications
IT62G Integrated Toolcarrier and 950G and 962G Wheel Loaders Fuses - Replace
120H and 135H Motor Graders Air System and Brakes Parking Brake
928G Wheel Loader Shipping the Machine
IT62G Integrated Toolcarrier and 950G and 962G Wheel Loaders Circuit Breakers - Reset
IT62G Integrated Toolcarrier and 950G and 962G Wheel Loaders Transmission Oil Filter - Replace