928G Wheel Loader Service Brake Control Caterpillar


Service Brake Control
`



Illustration 1g00100661


Brake Pedals - Use the left brake pedal or the right brake pedal to slow down the machine's ground speed for normal braking.



Illustration 2g00100676


Transmission Neutralizer Lockout Switch - The switch overrides the transmission neutralizer.

Press the top of the switch in order to override the transmission neutralizer.

Press the bottom of the switch in order to shift the transmission into a neutral position when the service brakes are applied. The service brakes will interrupt power to the transmission solenoids. This causes the transmission to be shifted into Neutral. The brake pedal will also slow the ground speed of the machine.

When the transmission is in the Neutral position, this permits a faster engine speed. A faster engine speed creates a better hydraulic response. A better hydraulic response may be desired in order to raise the bucket while you position the bucket at the same time.

Release the brake pedal in order to engage the transmission. Release the brake pedal in order to release the brake.