834B and 836 Landfill Compactor Throttle Lock Control Caterpillar


Throttle Lock Control
`
834B and 836 Landfill Compactor [SEBU6696]
FUEL SYSTEM
CONTROL GP-THROTTLE LOCK
834B and 836 Landfill Compactor Throttle Lock Control
1.1. Set the Throttle Lock
2.1. Cancel a Throttle Setting
3.1. Resume a Throttle Setting

The throttle lock allows the operator to set a desired engine rpm. The throttle lock can be used in the following manners:

  • The throttle lock can be set at the desired high rpm. This allows the engine to run at a continuous high rpm in order to provide maximum hydraulic power.

  • The throttle lock can be set for a desired low rpm. The operator may prefer to use the throttle control but the operator would also prefer to set a higher engine idle. The operator can release the throttle control in order to make directional changes. Releasing the throttle control only lowers the engine rpm to the desired throttle setting.

Set the Throttle Lock




Illustration 1g00038811



Illustration 2g00038813

The following procedure is the first method of setting the throttle lock:

  1. Push the top of on/off switch (1) in order to turn on the throttle lock.

  1. Depress the governor pedal in order to achieve the desired engine rpm.

  1. Depress button (2) in order to set the throttle.

The following procedure is the second method of setting the throttle lock:

  1. Push the top of on/off switch (1) in order to turn on the throttle lock.

  1. Depress button (3) and hold button (3) until the desired rpm is achieved.

  1. Release button (3) when the desired rpm is achieved.



Illustration 3g00038815

The indicator light for the throttle lock is illuminated when the on/off switch is in the ON position.

Cancel a Throttle Setting

The throttle setting may be cancelled by depressing the right brake pedal or by moving on/off switch (1) to the OFF position.

Resume a Throttle Setting

When the right brake pedal is used to cancel a throttle setting, depress button (3) in order to resume the throttle setting.

Information System:

834B and 836 Landfill Compactor Starting with Auxiliary Start Receptacle
844 Wheel Dozer Tree or Brush Removal
D9R Track-Type Tractor Standard Torque for Worm Drive Band Hose Clamps
D6R Track-Type Tractor Operation
834B and 836 Landfill Compactor After Starting Engine
CP-433C, CS-431C and CS-433C Paving Compactors Engine Starting with Jump Start Cables
834B and 836 Landfill Compactor Transmission Oil Filter - Replace
834B and 836 Landfill Compactor Rollover Protective Structure (ROPS) - Inspect
834B and 836 Landfill Compactor Transmission Oil - Change
834B and 836 Landfill Compactor Hydraulic System Oil Level - Check
834B and 836 Landfill Compactor Hydraulic System Oil - Change
834B and 836 Landfill Compactor Steering Cylinder Bearings - Lubricate
561M Pipelayer Track Roller Frame Guides - Inspect
834B and 836 Landfill Compactor Refill Capacities
834B and 836 Landfill Compactor Caterpillar Reference Material
834B and 836 Landfill Compactor Power Guard Control
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Seat Belt Adjustment
12H, 140H and 160H Motor Graders Hydraulic and Steering System Valve and Linkage Group
12H, 140H and 160H Motor Graders Hydraulic and Steering System Blade Lift Control Valve
D9R Track-Type Tractor Ripping
D9R Track-Type Tractor Adjustable Ripper
120H and 135H Motor Graders Hydraulic and Steering System Drawbar
120H Motor Grader Hydraulic and Steering System Drawbar
12H, 140H and 160H Motor Graders Hydraulic and Steering System Snow Plow/Bulldozer Relief Valve